The Hose Assembly,nonmetallic, cataloged under National Stock Number 4720-01-474-3368, is classified within Federal Supply Class 4720 (No Item Name Available) of the Pipe, Tubing, Hose, and Fittings group. The primary manufacturer of record is Bae Systems Controls Inc.. Government technical data includes 28 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 5 commercial cross-references from 2 manufacturers, enabling identification through both NSN and commercial part number lookups. 9 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 4720-01-474-3368 |
| Primary Part Number | 405747-01 |
| Item Name | Hose Assembly,nonmetallic |
| FSC / FSG | 4720 / 47 — No Item Name Available |
| Manufacturer | Bae Systems Controls Inc. |
| Status | ACTIVE |
| Operating Pressure | 100.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS |
| Thread Direction | RIGHT-HAND FIRST END |
| Connection Type | THREADED INTERNAL TUBE SECOND END |
| Connection Style | SWIVEL NUT FLARE FIRST END |
| Outside Diameter | 0.500 INCHES NOMINAL IN |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) FIRST END |
| Thread Class | 2B SECOND END |
| Thread Direction | RIGHT-HAND SECOND END |
| End Connection Design | STRAIGHT FIRST END |
| Inside Diameter | 0.500 INCHES NOMINAL IN |
| Connection Type | THREADED INTERNAL TUBE FIRST END |
| Layer Composition and Location | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| Connection Style | SWIVEL NUT, FLARELESS SECOND END |
| Seat Angle | 12.0 DEGREES FIRST END |
| Minimum Inside Bending Radius | 3.500 INCHES IN |
| End Connection Design | ELBOW SECOND END |
| Thread Class | 2B FIRST END |
| Nominal Thread Size | 0.750 INCHES SECOND END IN |
| Temp Rating | -40.0 FAHRENHEIT AND 300.0 FAHRENHEIT SINGLE RESPONSE DEGF |
| Hydrostatic Test Pressure | 200.0 POUNDS PER SQUARE INCH LBS |
| Measuring Method and Length | 44.130 INCHES NOMINAL WORKING IN |
| Inside Surface Condition | SMOOTH |
| Media for Which Designed | OIL, LUBRICATING, DIESTER BASE SINGLE RESPONSE |
| Nominal Thread Size | 0.750 INCHES FIRST END IN |
| Seat Angle | 37.0 DEGREES SECOND END |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) SECOND END |
| Cross-Sectional Shape Style | ROUND |
| Flow Angle | 45.0 DEGREES SECOND END |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| 405747 | Bae Systems Controls Inc. (USA) |
| 405747-01 PRIMARY | Bae Systems Controls Inc. (USA) |
| PL405550-01-01 FN 191 | Bae Systems Controls Inc. (USA) |
| D3082 PRIMARY | Delafield Corp Dba Delafield Fluid Technologies (USA) |
| PL405550-01-01 | Bae Systems Controls Inc. (USA) |
NSN 4720-01-474-3368 is a Hose Assembly,nonmetallic, manufactured by Bae Systems Controls Inc., classified under FSC 4720 (No Item Name Available). Status: active.
NSN 4720-01-474-3368 has 5 cross-referenced part numbers: 405747 (Bae Systems Controls Inc.), 405747-01 (Bae Systems Controls Inc.), PL405550-01-01 FN 191 (Bae Systems Controls Inc.), D3082 (Delafield Corp Dba Delafield Fluid Technologies), PL405550-01-01 (Bae Systems Controls Inc.).
There are 9 known substitutes for 4720-01-474-3368: 5930-00-078-5961, 3655-00-772-9896, 2835-00-946-2576 and 6 more. Verify interchangeability with system specifications before substitution.
Key specifications for 405747-01: Special Features: MATERIAL IS 316L; SPEC ALLOWS EITHER 316L OR 321 SS; Operating Pressure: 100.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS; Thread Direction: RIGHT-HAND FIRST END; Connection Type: THREADED INTERNAL TUBE SECOND END. 29 total characteristics are documented in the Federal Logistics Information System.