The Hose Assembly,nonmetallic, cataloged under National Stock Number 4720-01-285-0701, is classified within Federal Supply Class 4720 (Hose and Flexible Tubing) of the Pipe, Tubing, Hose, and Fittings group. The manufacturer of record is Strike Weapons and Unmanned Aviation. Government technical data includes 26 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 4720-01-285-0701 |
| Primary Part Number | JCM-15415-013 |
| Item Name | Hose Assembly,nonmetallic |
| FSC / FSG | 4720 / 47 — Hose and Flexible Tubing |
| Manufacturer | Strike Weapons and Unmanned Aviation |
| Status | ACTIVE |
| Flow Angle | 90.0 DEGREES FIRST END |
| Measuring Method and Length | 24.190 INCHES NOMINAL OVERALL IN |
| Temp Rating | -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF |
| Flange Thickness | 0.206 INCHES NOMINAL FIRST END IN |
| Minimum Inside Bending Radius | 12.000 INCHES IN |
| Connection Style | RAISED FIRST END |
| Flange Outside Diameter | 2.312 INCHES NOMINAL FIRST END IN |
| End Connection Design | ELBOW FIRST END |
| Layer Composition and Location | 1ST LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE AND 2ND LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE AND 3RD LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE AND 4TH LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| Angle Between Rigid Elbow Fittings in Deg | 107.0 |
| Connection Type | RAISED FACE FLANGE FIRST END |
| Cross-Sectional Shape Style | ROUND |
| Outside Diameter | 1.560 INCHES NOMINAL IN |
| Operating Pressure | 3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS |
| End Fitting Component and Material | COMPLETE FITTING STEEL ALL ENDS |
| Specification/standard Data | SAE J517,100R9,TYPE A-81343 NATIONAL STD/SPEC |
| Inside Diameter | 1.000 INCHES NOMINAL IN |
| Inside Surface Condition | SMOOTH |
| Raised Face Diameter | 0.062 INCHES NOMINAL FIRST END IN |
| Raised Face Height | 1.312 INCHES NOMINAL FIRST END IN |
| Media for Which Designed | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| Hydrostatic Test Pressure | 6000.0 POUNDS PER SQUARE INCH LBS |
| Burst Test Pressure | 12000.0 POUNDS PER SQUARE INCH LBS |
| Outer Covering Environmental Protection | OIL RESISTANT AND WEATHERPROOF |
| Flange Style | ROUND W/ OUT BOLT HOLES FIRST END |
| End Flange Construction | SOLID FIRST END |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| JCM-15415-013 PRIMARY | Strike Weapons and Unmanned Aviation (USA) |
| Reference | Meaning |
|---|---|
| JCM-15415 | 7/1 Vendor item drawing reference Strike Weapons and Unmanned Aviation |
| L2EC1616PA90X16PA90-24.19 | 5/9 Secondary reference Parker Hannifin Corp Hose Products Div |
| K3511919161616-24.19-107 | 3/2 Design control — primary reference U.S. Government activity |
NSN 4720-01-285-0701 is a Hose Assembly,nonmetallic, manufactured by Strike Weapons and Unmanned Aviation, classified under FSC 4720, Hose and Flexible Tubing. Status: active.
NSN 4720-01-285-0701 has 1 manufacturer part number on file: JCM-15415-013 (Strike Weapons and Unmanned Aviation).
1 possible match (shared part number, not a government interchangeability claim): 4720-01-285-0702. Verify interchangeability with system specifications before substitution.
Key specifications for JCM-15415-013: Flow Angle: 90.0 DEGREES FIRST END; Measuring Method and Length: 24.190 INCHES NOMINAL OVERALL IN; Temp Rating: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF; Flange Thickness: 0.206 INCHES NOMINAL FIRST END IN. 26 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.