JCM-15415-013: HOSE ASSEMBLY,NONMETALLIC.
The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include flow_angle: 90.0 DEGREES FIRST END, temp_rating: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF, flange_style: ROUND W/ OUT BOLT HOLES FIRST END, connection_type: RAISED FACE FLANGE FIRST END, inside_diameter: 1.000 INCHES NOMINAL IN, connection_style: RAISED FIRST END. This part is cataloged in the U.S.
Government catalog under NSN 4720-01-285-0701, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| flow_angle | 90.0 DEGREES FIRST END |
| temp_rating | -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF |
| flange_style | ROUND W/ OUT BOLT HOLES FIRST END |
| connection_type | RAISED FACE FLANGE FIRST END |
| inside_diameter | 1.000 INCHES NOMINAL IN |
| connection_style | RAISED FIRST END |
| flange_thickness | 0.206 INCHES NOMINAL FIRST END IN |
| outside_diameter | 1.560 INCHES NOMINAL IN |
| special_features | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC |
| operating_pressure | 3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS |
| raised_face_height | 1.312 INCHES NOMINAL FIRST END IN |
| burst_test_pressure | 12000.0 POUNDS PER SQUARE INCH LBS |
| NSN | 4720-01-285-0701 |
| FLOW ANGLE | 90.0 DEGREES FIRST END |
| MEASURING METHOD AND LENGTH | 24.190 INCHES NOMINAL OVERALL IN |
| TEMP RATING | -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF |
| FLANGE THICKNESS | 0.206 INCHES NOMINAL FIRST END IN |
| MINIMUM INSIDE BENDING RADIUS | 12.000 INCHES IN |
| CONNECTION STYLE | RAISED FIRST END |
| FLANGE OUTSIDE DIAMETER | 2.312 INCHES NOMINAL FIRST END IN |
| END CONNECTION DESIGN | ELBOW FIRST END |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE AND 2ND LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE AND 3RD LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE AND 4TH LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 107.0 |