The Hose,nonmetallic, cataloged under National Stock Number 4720-01-075-3937, is classified within Federal Supply Class 4720 (No Item Name Available) of the Pipe, Tubing, Hose, and Fittings group. The primary manufacturer of record is Sae International Dba Sae International. Government technical data includes 13 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 5 commercial cross-references from 3 manufacturers, enabling identification through both NSN and commercial part number lookups. 6 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 4720-01-075-3937 |
| Primary Part Number | 100R1AT-32 |
| Item Name | Hose,nonmetallic |
| FSC / FSG | 4720 / 47 — No Item Name Available |
| Manufacturer | Sae International Dba Sae International |
| Status | ACTIVE |
| Temp Rating | -40.0 FAHRENHEIT AND 212.0 FAHRENHEIT SINGLE RESPONSE DEGF |
| Burst Test Pressure | 1500.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS |
| Outside Diameter | 2.562 INCHES MINIMUM AND 2.688 INCHES MAXIMUM IN |
| Material | RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OR RUBBER CHLOROPRENE CLASS CR TUBE |
| Hydrostatic Test Pressure | 750.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS |
| Outer Covering Environmental Protection | OIL RESISTANT AND OZONE RESISTANT |
| Inside Surface Condition | SMOOTH |
| Specification/standard Data | 81349-MIL-H-52471C GOVERNMENT SPECIFICATION |
| Operating Pressure | 375.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS |
| Nondefinitive Spec/std Data | 100R1 TYPE |
| Layer Composition and Location | 1ST LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER, CHLOROPRENE |
| Cross-Sectional Shape Style | ROUND |
| Inside Diameter | 2.000 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| 100R1AT-32 | Society of Automotive Engineers Inc (USA) |
| MIL-H-52471 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| 100R1AT-32 PRIMARY | Sae International Dba Sae International (USA) |
| MIL-DTL-52471 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| M52471/4-32 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
NSN 4720-01-075-3937 is a Hose,nonmetallic, manufactured by Sae International Dba Sae International, classified under FSC 4720 (No Item Name Available). Status: active.
NSN 4720-01-075-3937 has 5 cross-referenced part numbers: 100R1AT-32 (Society of Automotive Engineers Inc), MIL-H-52471 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), 100R1AT-32 (Sae International Dba Sae International), MIL-DTL-52471 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), M52471/4-32 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M).
There are 6 known substitutes for 4720-01-075-3937: 4720-00-289-2615, 4720-01-017-6616, 4720-01-048-6683 and 3 more. Verify interchangeability with system specifications before substitution.
Key specifications for 100R1AT-32: Temp Rating: -40.0 FAHRENHEIT AND 212.0 FAHRENHEIT SINGLE RESPONSE DEGF; Burst Test Pressure: 1500.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS; Outside Diameter: 2.562 INCHES MINIMUM AND 2.688 INCHES MAXIMUM IN; Material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OR RUBBER CHLOROPRENE CLASS CR TUBE. 13 total characteristics are documented in the Federal Logistics Information System.