PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 100R1AT-32
100R1AT-32 ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The HOSE,NONMETALLIC is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OR RUBBER CHLOROPRENE CLASS CR TUBE, temp_rating: -40.0 FAHRENHEIT AND 212.0 FAHRENHEIT SINGLE RESPONSE DEGF, inside_diameter: 2.000 INCHES NOMINAL IN, outside_diameter: 2.562 INCHES MINIMUM AND 2.688 INCHES MAXIMUM IN, operating_pressure: 375.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS, burst_test_pressure: 1500.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-075-3937, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
100R1AT-32
NSN: 4720-01-075-3937
FSC: 4720
CAGE: 81343 — SOCIETY OF AUTOMOTIVE ENGINEERS INC (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OR RUBBER CHLOROPRENE CLASS CR TUBE
temp_rating-40.0 FAHRENHEIT AND 212.0 FAHRENHEIT SINGLE RESPONSE DEGF
inside_diameter2.000 INCHES NOMINAL IN
outside_diameter2.562 INCHES MINIMUM AND 2.688 INCHES MAXIMUM IN
operating_pressure375.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
burst_test_pressure1500.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
inside_surface_conditionSMOOTH
hydrostatic_test_pressure750.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
cross-sectional_shape_styleROUND
nondefinitive_spec/std_data100R1 TYPE
specification/standard_data81349-MIL-H-52471C GOVERNMENT SPECIFICATION
layer_composition_and_location1ST LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER, CHLOROPRENE
NSN4720-01-075-3937
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: 100R1AT-32 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -40.0 FAHRENHEIT AND 212.0 FAHRENHEIT SINGLE RESPONSE DEGF
•
BURST TEST PRESSURE: 1500.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
•
OUTSIDE DIAMETER: 2.562 INCHES MINIMUM AND 2.688 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OR RUBBER CHLOROPRENE CLASS CR TUBE
•
HYDROSTATIC TEST PRESSURE: 750.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
•
OUTER COVERING ENVIRONMENTAL PROTECTION: OIL RESISTANT AND OZONE RESISTANT
•
INSIDE SURFACE CONDITION: SMOOTH
•
SPECIFICATION/STANDARD DATA: 81349-MIL-H-52471C GOVERNMENT SPECIFICATION
TECHNICAL CHARACTERISTICS (FLIS)
TEMP RATING-40.0 FAHRENHEIT AND 212.0 FAHRENHEIT SINGLE RESPONSE DEGF
BURST TEST PRESSURE1500.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
OUTSIDE DIAMETER2.562 INCHES MINIMUM AND 2.688 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OR RUBBER CHLOROPRENE CLASS CR TUBE
HYDROSTATIC TEST PRESSURE750.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
OUTER COVERING ENVIRONMENTAL PROTECTIONOIL RESISTANT AND OZONE RESISTANT
INSIDE SURFACE CONDITIONSMOOTH
SPECIFICATION/STANDARD DATA81349-MIL-H-52471C GOVERNMENT SPECIFICATION
OPERATING PRESSURE375.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
NONDEFINITIVE SPEC/STD DATA100R1 TYPE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
H106Interchangeable
interchangeable cross-reference
interchangeable
1509/FC163-6Interchangeable
interchangeable cross-reference
interchangeable
H25-3-8Interchangeable
interchangeable cross-reference
interchangeable
2681-4Interchangeable
interchangeable cross-reference
interchangeable
822028001Interchangeable
interchangeable cross-reference
interchangeable
D704Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 100R1AT-32?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 100R1AT-32?
100R1AT-32 is a HOSE,NONMETALLIC.
What parts can replace 100R1AT-32?
There are 16 known substitutes for 100R1AT-32: H106, 1509/FC163-6, H25-3-8 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 100R1AT-32?
100R1AT-32 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-075-3937. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 100R1AT-32

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026