PartsTable TECHNICAL DATA SHEET
JULY 2026Technical Data Sheet

1509-8Hose,nonmetallic

Hampton Rubber Company · NSN 4720-01-018-6550 · FSC 4720 · No Item Name Available
Verified by PartsTable
NSN 4720-01-018-6550 — this item is cataloged by the U.S. Government under National Stock Number 4720-01-018-6550. Primary manufacturer part number: 1509-8.
Features
  • Hose,nonmetallic — FSC 4720
  • Outside Diameter: 0.937 INCHES MINIMUM AND 0.999 INCHES MAXIMUM IN
  • Burst Test Pressure: 14000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
  • Temp Rating: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
  • Layer Composition and Location: 2ND LAYER BRAIDED CORROSION RESISTANT STEEL WIRE OR 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE OR OUTER LAYER MOLDED RUBBER, CHLOROPRENE
  • Hydrostatic Test Pressure: 7000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
  • Criticality Code Justification: FEAT
  • Nondefinitive Spec/std Data: 100R2 TYPE
Applications
  • Fluid conveyance
  • Hydraulic system plumbing
  • Pneumatic line routing
General Description

The Hose,nonmetallic, cataloged under National Stock Number 4720-01-018-6550, is classified within Federal Supply Class 4720 (No Item Name Available) of the Pipe, Tubing, Hose, and Fittings group. The primary manufacturer of record is Hampton Rubber Company. Government technical data includes 12 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 11 commercial cross-references from 6 manufacturers, enabling identification through both NSN and commercial part number lookups. 12 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Cancelled.

Technical Specifications
ParameterValue
NSN4720-01-018-6550
Primary Part Number1509-8
Item NameHose,nonmetallic
FSC / FSG4720 / 47 — No Item Name Available
ManufacturerHampton Rubber Company
StatusCANCELLED
Outside Diameter0.937 INCHES MINIMUM AND 0.999 INCHES MAXIMUM IN
Burst Test Pressure14000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
Temp Rating-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
Layer Composition and Location2ND LAYER BRAIDED CORROSION RESISTANT STEEL WIRE OR 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE OR OUTER LAYER MOLDED RUBBER, CHLOROPRENE
Hydrostatic Test Pressure7000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
Criticality Code JustificationFEAT
Nondefinitive Spec/std Data100R2 TYPE
Operating Pressure3500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
Inside Surface ConditionSMOOTH
Outer Covering Environmental ProtectionOIL RESISTANT AND OZONE RESISTANT
Cross-Sectional Shape StyleROUND
Inside Diameter0.485 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
Lifecycle & Compliance
Acquisition StatusCANCELLED
HAZMATNo
Verified Substitutes 12
4920-00-102-904242-3-2-8 INTERCHANGEABLE
Fixture,aircraft Maintenance
Celtech Corporation Div Use CAGE 65552 for All Orders
4720-00-289-2615 INTERCHANGEABLE
Hose,nonmetallic
5315-00-453-6491 INTERCHANGEABLE
Pin
2990-00-536-2851150-98 INTERCHANGEABLE
Spring,adjusting Go
Cummins Power Generation Inc.
5120-00-555-207415098 INTERCHANGEABLE
Face,hammer,inserted
Nupla Corporation
6685-00-627-0372 INTERCHANGEABLE
Thermometer,indicating,capillary
5410-00-775-8939 INTERCHANGEABLE
Lifting and Tiedown
4720-01-017-5127 INTERCHANGEABLE
Hose,nonmetallic
4720-01-017-5128 INTERCHANGEABLE
Hose,nonmetallic
8145-01-050-8665 INTERCHANGEABLE
Container,shipping-Storage,proje
Cross-Reference Index
Part NumberManufacturer
1509-8 Hampton Rubber Company (USA)
FC163/1509-8 Danfoss Power Solutions II, Llc (USA)
1509/FC163-8 Danfoss Power Solutions II, Llc (USA)
MIL-DTL-52471/5 Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M
1509-8 Danfoss Power Solutions II, Llc (USA)
MIL-H-52471 Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M
4232-8 Parker Hannifin Corp Dba Pneutronics Div Stratoflex Products Division (USA)
MS39263-8 Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M
MS39263-8B Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M
1509-8 Eaton Aeroquip Llc Dba Jackson North 1 Div Fluid and Electrical Distribution (USA)
M52471/5-8 Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M
Related Parts
4920-00-102-9042INTERCHANGEABLE
FIXTURE,AIRCRAFT MAINTENANCE
42-3-2-8
4720-00-289-2615INTERCHANGEABLE
HOSE,NONMETALLIC
5315-00-453-6491INTERCHANGEABLE
PIN
2990-00-536-2851INTERCHANGEABLE
SPRING,ADJUSTING GO
150-98
5120-00-555-2074INTERCHANGEABLE
FACE,HAMMER,INSERTED
15098
6685-00-627-0372INTERCHANGEABLE
THERMOMETER,INDICATING,CAPILLARY
5410-00-775-8939INTERCHANGEABLE
LIFTING AND TIEDOWN
4720-01-017-5127INTERCHANGEABLE
HOSE,NONMETALLIC
4720-01-017-5128INTERCHANGEABLE
HOSE,NONMETALLIC
8145-01-050-8665INTERCHANGEABLE
CONTAINER,SHIPPING-STORAGE,PROJE
4720-01-075-5070INTERCHANGEABLE
HOSE,NONMETALLIC
4720-01-083-2450INTERCHANGEABLE
HOSE,NONMETALLIC

Frequently Asked Questions

What is NSN 4720-01-018-6550?

NSN 4720-01-018-6550 is a Hose,nonmetallic, manufactured by Hampton Rubber Company, classified under FSC 4720 (No Item Name Available). Status: cancelled.

What are the part numbers for NSN 4720-01-018-6550?

NSN 4720-01-018-6550 has 11 cross-referenced part numbers: 1509-8 (Hampton Rubber Company), FC163/1509-8 (Danfoss Power Solutions II, Llc), 1509/FC163-8 (Danfoss Power Solutions II, Llc), MIL-DTL-52471/5 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), 1509-8 (Danfoss Power Solutions II, Llc) and 6 more.

What NSN replaces 4720-01-018-6550?

There are 12 known substitutes for 4720-01-018-6550: 4920-00-102-9042, 4720-00-289-2615, 5315-00-453-6491 and 9 more. Verify interchangeability with system specifications before substitution.

What are the specifications of 1509-8?

Key specifications for 1509-8: Outside Diameter: 0.937 INCHES MINIMUM AND 0.999 INCHES MAXIMUM IN; Burst Test Pressure: 14000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS; Temp Rating: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF; Layer Composition and Location: 2ND LAYER BRAIDED CORROSION RESISTANT STEEL WIRE OR 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE OR OUTER LAYER MOLDED RUBBER, CHLOROPRENE. 14 total characteristics are documented in the Federal Logistics Information System.

Is NSN 4720-01-018-6550 still in active supply?

NSN 4720-01-018-6550 is currently cancelled. Check with the Defense Logistics Agency for current availability and authorized substitutes.

Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com