PartsTable
Technical Data Sheet
PartsTable / COMPONENT / FC163/1509-8
FC163/1509-8 ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The FC163/1509-8 is a the manufacturer industrial component. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-018-6550, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FC163/1509-8
NSN: 4720-01-018-6550
FSC: 4720
CAGE: 01276 — DANFOSS POWER SOLUTIONS II, LLC (USA)
SPECIFICATIONS
Part NumberFC163/1509-8
NSN4720-01-018-6550
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: FC163/1509-8 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 0.937 INCHES MINIMUM AND 0.999 INCHES MAXIMUM IN
•
BURST TEST PRESSURE: 14000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
•
TEMP RATING: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
•
LAYER COMPOSITION AND LOCATION: 2ND LAYER BRAIDED CORROSION RESISTANT STEEL WIRE OR 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE OR OUTER LAYER MOLDED RUBBER, CHLOROPRENE
•
HYDROSTATIC TEST PRESSURE: 7000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
•
CRITICALITY CODE JUSTIFICATION: FEAT
•
NONDEFINITIVE SPEC/STD DATA: 100R2 TYPE
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER0.937 INCHES MINIMUM AND 0.999 INCHES MAXIMUM IN
BURST TEST PRESSURE14000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
TEMP RATING-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
LAYER COMPOSITION AND LOCATION2ND LAYER BRAIDED CORROSION RESISTANT STEEL WIRE OR 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE OR OUTER LAYER MOLDED RUBBER, CHLOROPRENE
HYDROSTATIC TEST PRESSURE7000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
CRITICALITY CODE JUSTIFICATIONFEAT
SPECIAL FEATURESWEAPON SYSTEM ESSENTIAL; INNER CONVEYING TUBE MATERIAL: BUTADIENE ACRYLNITRILE RUBBER OR CHLOROPRENE RUBBER
NONDEFINITIVE SPEC/STD DATA100R2 TYPE
OPERATING PRESSURE3500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
INSIDE SURFACE CONDITIONSMOOTH
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
42-3-2-8Interchangeable
interchangeable cross-reference
interchangeable
H106Interchangeable
interchangeable cross-reference
interchangeable
1509/FC163-6Interchangeable
interchangeable cross-reference
interchangeable
H25-3-8Interchangeable
interchangeable cross-reference
interchangeable
150-98Interchangeable
interchangeable cross-reference
interchangeable
150A649Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy FC163/1509-8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FC163/1509-8?
FC163/1509-8 is a FC163/1509-8.
What parts can replace FC163/1509-8?
There are 23 known substitutes for FC163/1509-8: 42-3-2-8, H106, 1509/FC163-6 and 20 more. Substitute compatibility should be verified for your specific system.
Is FC163/1509-8 still available?
FC163/1509-8 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FC163/1509-8

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026