PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 422.1390.0000
422.1390.0000 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The 422.1390.0000 is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-215-0296, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
422.1390.0000
NSN: 3110-00-215-0296
FSC: 3110
CAGE: 0N4U6 — BREVINI USA INC (USA)
SPECIFICATIONS
Part Number422.1390.0000
NSN3110-00-215-0296
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 422.1390.0000 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 75.0 MILLIMETERS NOMINAL MM
•
STANDARD TOLERANCE DESIGNATION: INTERNATIONAL STANDARDS ORGANIZATION STANDARD TOLERANCE
•
LUBRICATION MATERIAL: LUBRICANT
•
CONE CORNER RADIUS: 2.5 MILLIMETERS NOMINAL MM
•
CUP WIDTH: 22.0 MILLIMETERS NOMINAL MM
•
RETAINER FABRICATION METHOD: PRESSED
•
BACKFACE CORNER RADIUS: 2.5 MILLIMETERS NOMINAL MM
•
STYLE DESIGNATOR: STRAIGHT BORE, NORMAL ANGLE
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER75.0 MILLIMETERS NOMINAL MM
STANDARD TOLERANCE DESIGNATIONINTERNATIONAL STANDARDS ORGANIZATION STANDARD TOLERANCE
LUBRICATION MATERIALLUBRICANT
CONE CORNER RADIUS2.5 MILLIMETERS NOMINAL MM
CUP WIDTH22.0 MILLIMETERS NOMINAL MM
RETAINER FABRICATION METHODPRESSED
BACKFACE CORNER RADIUS2.5 MILLIMETERS NOMINAL MM
STYLE DESIGNATORSTRAIGHT BORE, NORMAL ANGLE
OVERALL OUTSIDE DIAMETER130.0 MILLIMETERS NOMINAL MM
OVERALL WIDTH27.25 MILLIMETERS NOMINAL MM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
302-15Interchangeable
interchangeable cross-reference
interchangeable
3382Interchangeable
interchangeable cross-reference
interchangeable
K3382Interchangeable
interchangeable cross-reference
interchangeable
7215Interchangeable
interchangeable cross-reference
interchangeable
53215Interchangeable
interchangeable cross-reference
interchangeable
11069795Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 422.1390.0000?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 422.1390.0000?
422.1390.0000 is a 422.1390.0000.
What parts can replace 422.1390.0000?
There are 13 known substitutes for 422.1390.0000: 302-15, 3382, K3382 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 422.1390.0000?
422.1390.0000 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-215-0296. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 422.1390.0000

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026