Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The RESISTOR,FIXED,COMPOSITION is a the manufacturer industrial component. Key specifications include diameter: 0.203 INCHES NOMINAL IN, body_length: 0.375 INCHES NOMINAL IN, body_diameter: 0.138 INCHES NOMINAL IN, overall_width: 0.500 INCHES NOMINAL IN, terminal_type: WIRE LEAD, inclosure_type: ENCAPSULATED. This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-091-3790, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
MRO→MRO_GENERAL→332-1115
NSN:5340-00-091-3790 FSC:5340 CAGE:44940 — CUMMINS POWER GENERATION INC. (USA)
SPECIFICATIONS
diameter
0.203 INCHES NOMINAL IN
material
STEEL COMP 1005 OR STEEL COMP 1006 OR STEEL COMP 1008 OR STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1012 OR STEEL COMP 1013 OR STEEL COMP 1018 OR STEEL COMP 1020 BAND
body_length
0.375 INCHES NOMINAL IN
body_diameter
0.138 INCHES NOMINAL IN
overall_width
0.500 INCHES NOMINAL IN
terminal_type
WIRE LEAD
inclosure_type
ENCAPSULATED
terminal_length
1.500 INCHES NOMINAL IN
style_designator
AXIAL TERMINAL EACH END
surface_treatment
CADMIUM OR ZINC BAND
material_thickness
0.032 INCHES NOMINAL IN
loop_inside_diameter
0.562 INCHES NOMINAL IN
NSN
5340-00-091-3790
COMPONENT DIAGRAM
KEY FEATURES
•
DIAMETER: 0.203 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.625 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.032 INCHES NOMINAL IN
•
LOOP INSIDE DIAMETER: 0.562 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325,TY 2,CL 3 FED SPEC 2ND TREATMENT RESPONSE BAND
•
MATERIAL: STEEL COMP 1005 OR STEEL COMP 1006 OR STEEL COMP 1008 OR STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1012 OR STEEL COMP 1013 OR STEEL COMP 1018 OR STEEL COMP 1020 BAND
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.844 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
DIAMETER
0.203 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE
0.625 INCHES NOMINAL IN
MATERIAL THICKNESS
0.032 INCHES NOMINAL IN
LOOP INSIDE DIAMETER
0.562 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
QQ-P-416,TY 2,CL 3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325,TY 2,CL 3 FED SPEC 2ND TREATMENT RESPONSE BAND
MATERIAL
STEEL COMP 1005 OR STEEL COMP 1006 OR STEEL COMP 1008 OR STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1012 OR STEEL COMP 1013 OR STEEL COMP 1018 OR STEEL COMP 1020 BAND
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 332-1115?
332-1115 is a RESISTOR,FIXED,COMPOSITION. It is classified as a MRO (MRO_GENERAL).
What parts can replace 332-1115?
There are 10 known substitutes for 332-1115: MS21333-27, NASM21333, MS21333-10 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 332-1115?
332-1115 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-091-3790. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.