PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 214-1043P17
214-1043P17 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.203 INCHES NOMINAL IN, material: PLASTIC POLYHEXAMETHYLENE AMIDE OVERALL, overall_width: 0.500 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.060 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-819-5027, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
214-1043P17
NSN: 5340-00-819-5027
FSC: 5340
CAGE: 3B150 — RAYTHEON COMPANY DBA RAYTHEON CO (USA)
SPECIFICATIONS
diameter0.203 INCHES NOMINAL IN
materialPLASTIC POLYHEXAMETHYLENE AMIDE OVERALL
overall_width0.500 INCHES NOMINAL IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.060 INCHES NOMINAL IN
loop_inside_diameter1.188 INCHES NOMINAL IN
material_document_and_classificationASTM D4066 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
distance_from_loop_center_to_tongue_end1.205 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole1.002 INCHES NOMINAL IN
NSN5340-00-819-5027
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 214-1043P17 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.205 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL: PLASTIC POLYHEXAMETHYLENE AMIDE OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM D4066 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
DIAMETER: 0.203 INCHES NOMINAL IN
•
LOOP INSIDE DIAMETER: 1.188 INCHES NOMINAL IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH0.500 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.205 INCHES NOMINAL IN
STYLE DESIGNATORSINGLE LOOP
MATERIALPLASTIC POLYHEXAMETHYLENE AMIDE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONASTM D4066 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
DIAMETER0.203 INCHES NOMINAL IN
LOOP INSIDE DIAMETER1.188 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
MATERIAL THICKNESS0.060 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE1.002 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
13-16-6Upgraded Successor
successor cross-reference
successor
511C7-59Upgraded Successor
successor cross-reference
successor
6-13Upgraded Successor
successor cross-reference
successor
214-1043P13Interchangeable
interchangeable cross-reference
interchangeable
8811154-13Interchangeable
interchangeable cross-reference
interchangeable
J1058Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 214-1043P17?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 214-1043P17?
214-1043P17 is a CLAMP,LOOP.
What parts can replace 214-1043P17?
There are 19 known substitutes for 214-1043P17: 13-16-6, 511C7-59, 6-13 and 16 more. Substitute compatibility should be verified for your specific system.
Is 214-1043P17 still available?
214-1043P17 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 214-1043P17

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026