PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 511C7-59
511C7-59 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.203 INCHES NOMINAL IN, material: PLASTIC POLYAMIDE NYLON BAND, overall_width: 0.500 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.060 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-200-5933, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
511C7-59
NSN: 5340-00-200-5933
FSC: 5340
CAGE: 94033 — CARDWELL CONDENSER CORP LAPOINTE-ADMIRAL DIV (USA)
SPECIFICATIONS
diameter0.203 INCHES NOMINAL IN
materialPLASTIC POLYAMIDE NYLON BAND
overall_width0.500 INCHES NOMINAL IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.060 INCHES NOMINAL IN
loop_inside_diameter0.797 INCHES NOMINAL IN
material_document_and_classificationF-10001,FSCM 88607 MFR REF SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end1.017 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.814 INCHES NOMINAL IN
NSN5340-00-200-5933
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 511C7-59 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DIAMETER: 0.203 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.060 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: F-10001,FSCM 88607 MFR REF SINGLE MATERIAL RESPONSE BAND
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.814 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.017 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SINGLE LOOP
TECHNICAL CHARACTERISTICS (FLIS)
DIAMETER0.203 INCHES NOMINAL IN
MATERIAL THICKNESS0.060 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONF-10001,FSCM 88607 MFR REF SINGLE MATERIAL RESPONSE BAND
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.814 INCHES NOMINAL IN
OVERALL WIDTH0.500 INCHES NOMINAL IN
MATERIAL THICKNESS0.060 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.017 INCHES NOMINAL IN
STYLE DESIGNATORSINGLE LOOP
MATERIAL DOCUMENT AND CLASSIFICATIONF-10001,FSCM 88607 MFR REF SINGLE MATERIAL RESPONSE BAND
DIAMETER0.203 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
13-16-6Upgraded Successor
successor cross-reference
successor
214-1043P13Upgraded Successor
successor cross-reference
successor
8811154-13Upgraded Successor
successor cross-reference
successor
613Upgraded Successor
successor cross-reference
successor
12553269Upgraded Successor
successor cross-reference
successor
S19904Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 511C7-59?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 511C7-59?
511C7-59 is a CLAMP,LOOP.
What parts can replace 511C7-59?
There are 17 known substitutes for 511C7-59: 13-16-6, 214-1043P13, 8811154-13 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 511C7-59?
511C7-59 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-200-5933. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 511C7-59

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026