PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 214-1043P13
214-1043P13 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.203 INCHES NOMINAL IN, material: PLASTIC POLYAMIDE NYLON BAND, overall_width: 0.500 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.060 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-291-5310, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
214-1043P13
NSN: 5340-00-291-5310
FSC: 5340
CAGE: 3B150 — RAYTHEON COMPANY DBA RAYTHEON CO (USA)
SPECIFICATIONS
diameter0.203 INCHES NOMINAL IN
materialPLASTIC POLYAMIDE NYLON BAND
overall_width0.500 INCHES NOMINAL IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.060 INCHES NOMINAL IN
loop_inside_diameter0.812 INCHES NOMINAL IN
material_document_and_classificationE. I. DUPONT DENEMOURS,F-10001 MFR REF SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end1.017 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.814 INCHES NOMINAL IN
NSN5340-00-291-5310
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 214-1043P13 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: E. I. DUPONT DENEMOURS,F-10001 MFR REF SINGLE MATERIAL RESPONSE BAND
•
STYLE DESIGNATOR: SINGLE LOOP
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
MATERIAL: PLASTIC POLYAMIDE NYLON BAND
•
LOOP INSIDE DIAMETER: 0.812 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.814 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.060 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.017 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATIONE. I. DUPONT DENEMOURS,F-10001 MFR REF SINGLE MATERIAL RESPONSE BAND
STYLE DESIGNATORSINGLE LOOP
TONGUE HOLE TYPEROUND, UNTHREADED
MATERIALPLASTIC POLYAMIDE NYLON BAND
LOOP INSIDE DIAMETER0.812 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.814 INCHES NOMINAL IN
MATERIAL THICKNESS0.060 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.017 INCHES NOMINAL IN
DIAMETER0.203 INCHES NOMINAL IN
OVERALL WIDTH0.500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
13-16-6Upgraded Successor
successor cross-reference
successor
511C7-59Upgraded Successor
successor cross-reference
successor
6-13Upgraded Successor
successor cross-reference
successor
J1058Interchangeable
interchangeable cross-reference
interchangeable
6CS325Interchangeable
interchangeable cross-reference
interchangeable
411264Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 214-1043P13?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 214-1043P13?
214-1043P13 is a CLAMP,LOOP.
What parts can replace 214-1043P13?
There are 18 known substitutes for 214-1043P13: 13-16-6, 511C7-59, 6-13 and 15 more. Substitute compatibility should be verified for your specific system.
Is 214-1043P13 still available?
214-1043P13 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 214-1043P13

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026