PartsTable
Technical Data Sheet
Download PDF

210007 — RESISTOR,VARIABLE,WIRE WOUND,NON

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

210007: RESISTOR,VARIABLE,WIRE WOUND,NON.

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include body_style: RECTANGULAR W/MOUNTING HOLES/SLOTS, body_width: 0.280 INCHES NOMINAL IN, body_height: 0.312 INCHES NOMINAL IN, body_length: 1.250 INCHES NOMINAL IN, shaft_style: ROUND, SLOTTED, shaft_length: 0.063 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-596-7693, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 210007
NSN: 5310-00-596-7693
NIINs: 005967693, 008215717, 015137253
FSC: 5310 — Nuts and Washers
CAGE: 80009 — TEKTRONIX, INC. (USA)
SPECIFICATIONS
materialSTEEL COMP 1050 OR STEEL COMP 1551 OR STEEL COMP 1059 OR STEEL COMP 1060 OR STEEL COMP 1561 OR STEEL COMP 1064 OVERALL
body_styleRECTANGULAR W/MOUNTING HOLES/SLOTS
body_width0.280 INCHES NOMINAL IN
body_height0.312 INCHES NOMINAL IN
body_length1.250 INCHES NOMINAL IN
shaft_styleROUND, SLOTTED
shaft_length0.063 INCHES NOMINAL IN
actuator_typeSINGLE SHAFT
hole_diameter0.168 INCHES MINIMUM AND 0.176 INCHES MAXIMUM IN
overall_width0.280 INCHES NOMINAL IN
overall_height0.312 INCHES NOMINAL IN
overall_length1.313 INCHES NOMINAL IN
NSN5310-00-596-7693
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 210007 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
HARDNESS RATING: 40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM
•
STYLE DESIGNATOR: FLAT EXTERNAL TEETH
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
•
OUTSIDE DIAMETER: 0.365 INCHES MINIMUM AND 0.381 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.018 INCHES MINIMUM AND 0.023 INCHES MAXIMUM IN
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
HARDNESS RATING40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM
STYLE DESIGNATORFLAT EXTERNAL TEETH
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OVERALL
OUTSIDE DIAMETER0.365 INCHES MINIMUM AND 0.381 INCHES MAXIMUM IN
MATERIAL THICKNESS0.018 INCHES MINIMUM AND 0.023 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
END ITEM IDENTIFICATIONVEHICLE, AIRCRAFT REFUELER R-14,TEST CONSOLES, MINI-SACE,TEST SET, TTU-205,AIRBORNE MOBILE DIR AIR SPT CTL (2ID),(02M JUL83)(AN/UYQ-3A), MISSILE, AIR-TO-AIR, PHOENIX (AIM-54),FIRE PUMPS,L.P. COMPRESSORS,SUPPORT EQUIPMENT, B-1 AIRCRAFT, LAV, ANTI-TANK,AIR COMPRESSORS, HIGH PRESSURE; 2320-01-304-2277 PLS (PALLETIZED LOADING SYSTEM); ARMORED MULTI-PURPOSE VEHICLE (AMPV) A
MATERIALSTEEL COMP 1050 OR STEEL COMP 1551 OR STEEL COMP 1059 OR STEEL COMP 1060 OR STEEL COMP 1561 OR STEEL COMP 1064 OVERALL
HOLE DIAMETER0.168 INCHES MINIMUM AND 0.176 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 9
NAS1676C416Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
MS35335-59Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
1108-00Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
114602Reference document
Same NSN cross-reference
Reference document — Secondary reference
MS35335-31Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
10516264Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 210007?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 210007?
210007 is a RESISTOR,VARIABLE,WIRE WOUND,NON. It is classified as a MRO (MRO_GENERAL).
What parts can replace 210007?
There are 9 known substitutes for 210007: NAS1676C416, MS35335-59, 1108-00 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 210007?
210007 is cataloged in the U.S. Government catalog under NSN 5310-00-596-7693. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 210007

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.