PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 114602
114602 ✓ Verified by PartsTable
Nissin · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

Chicken meat pieces, red bell pepper, leek, delicious yakitori sauce and 18g protein per cup? Look no further, you will find this in our Cup Noodle Soba Protein Yakitori Chicken. Key specifications include material: STEEL, thread_class: 2A A, hole_diameter: 0.168 INCHES MINIMUM AND 0.176 INCHES MAXIMUM IN, thread_length: 0.187 INCHES NOMINAL IN, hardness_rating: 40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM, outside_diameter: 0.365 INCHES MINIMUM AND 0.381 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-596-7693, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
114602
NSN: 5310-00-596-7693
FSC: 5310
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
materialSTEEL
thread_class2A A
hole_diameter0.168 INCHES MINIMUM AND 0.176 INCHES MAXIMUM IN
thread_length0.187 INCHES NOMINAL IN
hardness_rating40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM
outside_diameter0.365 INCHES MINIMUM AND 0.381 INCHES MAXIMUM IN
style_designatorFLAT EXTERNAL TEETH
thread_directionRIGHT-HAND
surface_treatmentCADMIUM AND CHROMATE OVERALL
material_thickness0.018 INCHES MINIMUM AND 0.023 INCHES MAXIMUM IN
internal_drive_styleW/O INTERNAL DRIVE
nominal_thread_diameter0.098 INCHES IN
NSN5310-00-596-7693
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 114602 · Nissin ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
STYLE DESIGNATOR: FLAT EXTERNAL TEETH
•
HOLE DIAMETER: 0.168 INCHES MINIMUM AND 0.176 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 0.365 INCHES MINIMUM AND 0.381 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
•
MATERIAL THICKNESS: 0.018 INCHES MINIMUM AND 0.023 INCHES MAXIMUM IN
•
HARDNESS RATING: 40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM
•
MATERIAL: STEEL COMP 1050 OR STEEL COMP 1551 OR STEEL COMP 1059 OR STEEL COMP 1060 OR STEEL COMP 1561 OR STEEL COMP 1064 OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
STYLE DESIGNATORFLAT EXTERNAL TEETH
HOLE DIAMETER0.168 INCHES MINIMUM AND 0.176 INCHES MAXIMUM IN
OUTSIDE DIAMETER0.365 INCHES MINIMUM AND 0.381 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OVERALL
MATERIAL THICKNESS0.018 INCHES MINIMUM AND 0.023 INCHES MAXIMUM IN
HARDNESS RATING40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM
MATERIALSTEEL COMP 1050 OR STEEL COMP 1551 OR STEEL COMP 1059 OR STEEL COMP 1060 OR STEEL COMP 1561 OR STEEL COMP 1064 OVERALL
END ITEM IDENTIFICATIONVEHICLE, AIRCRAFT REFUELER R-14,TEST CONSOLES, MINI-SACE,TEST SET, TTU-205,AIRBORNE MOBILE DIR AIR SPT CTL (2ID),(02M JUL83)(AN/UYQ-3A), MISSILE, AIR-TO-AIR, PHOENIX (AIM-54),FIRE PUMPS,L.P. COMPRESSORS,SUPPORT EQUIPMENT, B-1 AIRCRAFT, LAV, ANTI-TANK,AIR COMPRESSORS, HIGH PRESSURE; 2320-01-304-2277 PLS (PALLETIZED LOADING SYSTEM); ARMORED MULTI-PURPOSE VEHICLE (AMPV) A
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 28
1224Interchangeable
interchangeable cross-reference
interchangeable
1229G423Interchangeable
interchangeable cross-reference
interchangeable
115551Interchangeable
interchangeable cross-reference
interchangeable
5310PL0652572Interchangeable
interchangeable cross-reference
interchangeable
MS35333-33Interchangeable
interchangeable cross-reference
interchangeable
MILW6986Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 114602?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 114602?
114602 is a COIL ASSEMBLY,RADIO FREQUENCY manufactured by Nissin.
What parts can replace 114602?
There are 28 known substitutes for 114602: 1224, 1229G423, 115551 and 25 more. Substitute compatibility should be verified for your specific system.
Is 114602 still available?
114602 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 114602

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026