PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 207722
207722 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, thread_length: 22.0 MILLIMETERS MM, special_features: CANNULATED LONG THREAD SCREW; (SHORT THREAD = 1/2 SCREW LENGTH), outside_thread_diameter: 4.0 MILLIMETERS NOMINAL MM, part_name_assigned_by_controlling_agency: SCREW CANNULATED 22MM LONG 4MM OUTSIDE DIA MM. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-291-5347, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
207722
NSN: 5340-00-291-5347
FSC: 5340
CAGE: 0KDP7 — KIDDE-FENWAL, LLC (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
thread_length22.0 MILLIMETERS MM
special_featuresCANNULATED LONG THREAD SCREW; (SHORT THREAD = 1/2 SCREW LENGTH)
outside_thread_diameter4.0 MILLIMETERS NOMINAL MM
part_name_assigned_by_controlling_agencySCREW CANNULATED 22MM LONG 4MM OUTSIDE DIA MM
NSN5340-00-291-5347
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 207722 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: 00-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE BAND
•
SURFACE TREATMENT: CHROMATE BAND
•
STYLE DESIGNATOR: OFFSET MOUNT
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.872 INCHES NOMINAL IN
•
LOOP INSIDE DIAMETER: 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.654 INCHES NOMINAL IN
•
DIAMETER: 0.204 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATION00-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE BAND
SURFACE TREATMENTCHROMATE BAND
STYLE DESIGNATOROFFSET MOUNT
DISTANCE FROM LOOP CENTER TO TONGUE END0.872 INCHES NOMINAL IN
LOOP INSIDE DIAMETER0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
END ITEM IDENTIFICATIONMULTIPLE LAUNCH ROCKET SYSTEM (MLRS)
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.654 INCHES NOMINAL IN
DIAMETER0.204 INCHES NOMINAL IN
MATERIALALUMINUM ALLOY 2024 BAND
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION-1L-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE BAND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 30
MILC8603Upgraded Successor
successor cross-reference
successor
99122Upgraded Successor
successor cross-reference
successor
MS21919G8Upgraded Successor
successor cross-reference
successor
5096D16Upgraded Successor
successor cross-reference
successor
534002989402Upgraded Successor
successor cross-reference
successor
MS21919G11Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 207722?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 207722?
207722 is a CLAMP,LOOP.
What parts can replace 207722?
There are 30 known substitutes for 207722: MILC8603, 99122, MS21919G8 and 27 more. Substitute compatibility should be verified for your specific system.
Is 207722 still available?
207722 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 207722

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026