PartsTable / COMPONENT / 207044
207044
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The SPACER,SLEEVE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, corner_shape: SQUARE ALL CORNERS, overall_length: 1.3750 INCHES MINIMUM AND 1.3800 INCHES MAXIMUM IN, hardness_rating: 28.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM OVERALL, style_designator: SOLID, PLAIN, NO OUTSIDE FLANGES, surface_treatment: CADMIUM LEFT END SURFACE OF BODY. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-245-5424, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
207044
NSN: 5330-00-245-5424 FSC: 5330 CAGE: 64829 — ARVINMERITOR INC (USA)
SPECIFICATIONS
material STEEL OVERALL corner_shape SQUARE ALL CORNERS overall_length 1.3750 INCHES MINIMUM AND 1.3800 INCHES MAXIMUM IN hardness_rating 28.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM OVERALL style_designator SOLID, PLAIN, NO OUTSIDE FLANGES surface_treatment CADMIUM LEFT END SURFACE OF BODY body_inside_diameter 0.5910 INCHES MINIMUM AND 0.5920 INCHES MAXIMUM IN body_outside_diameter 0.7400 INCHES MINIMUM AND 0.7600 INCHES MAXIMUM IN NSN 5330-00-245-5424
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 207044
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• CROSS-SECTIONAL THICKNESS: 0.085 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN
• OUTSIDE DIAMETER: 5.010 INCHES MINIMUM AND 5.020 INCHES MAXIMUM IN
• HARDNESS RATING: 85.0 SHORE DUROMETER A MINIMUM AND 95.0 SHORE DUROMETER A MAXIMUM OVERALL
• CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
• STYLE DESIGNATOR: CIRCULAR
• MATERIAL: RUBBER SYNTHETIC OVERALL
• APERTURE DIAMETER: 4.805 INCHES MINIMUM AND 4.815 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL THICKNESS 0.085 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN OUTSIDE DIAMETER 5.010 INCHES MINIMUM AND 5.020 INCHES MAXIMUM IN HARDNESS RATING 85.0 SHORE DUROMETER A MINIMUM AND 95.0 SHORE DUROMETER A MAXIMUM OVERALL CROSS-SECTIONAL SHAPE STYLE SOLID SINGLE OR COMPOSITION STYLE DESIGNATOR CIRCULAR MATERIAL RUBBER SYNTHETIC OVERALL APERTURE DIAMETER 4.805 INCHES MINIMUM AND 4.815 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
6879 Interchangeable interchangeable cross-reference
interchangeable
60-8684 Interchangeable interchangeable cross-reference
interchangeable
8478 Interchangeable interchangeable cross-reference
interchangeable
AMS-QQ-A-200/11 Interchangeable interchangeable cross-reference
interchangeable
8536 Interchangeable interchangeable cross-reference
interchangeable
FU2789 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 207044?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 207044?
207044 is a SPACER,SLEEVE.
What parts can replace 207044?
There are 27 known substitutes for 207044: 6879, 60-8684, 8478 and 24 more. Substitute compatibility should be verified for your specific system.
Is 207044 still available?
207044 is currently cancelled.