PartsTable / COMPONENT / HW47
HW47
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, hardness_rating: 85.0 SHORE DUROMETER A MINIMUM AND 95.0 SHORE DUROMETER A MAXIMUM OVERALL, outside_diameter: 5.010 INCHES MINIMUM AND 5.020 INCHES MAXIMUM IN, style_designator: CIRCULAR, aperture_diameter: 4.805 INCHES MINIMUM AND 4.815 INCHES MAXIMUM IN, cross-sectional_thickness: 0.085 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-245-5424, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
HW47
NSN: 5330-00-245-5424 FSC: 5330 CAGE: 13800 — PARKER-HANNIFIN CORPORATION (USA)
SPECIFICATIONS
material RUBBER SYNTHETIC OVERALL hardness_rating 85.0 SHORE DUROMETER A MINIMUM AND 95.0 SHORE DUROMETER A MAXIMUM OVERALL outside_diameter 5.010 INCHES MINIMUM AND 5.020 INCHES MAXIMUM IN style_designator CIRCULAR aperture_diameter 4.805 INCHES MINIMUM AND 4.815 INCHES MAXIMUM IN cross-sectional_thickness 0.085 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN cross-sectional_shape_style SOLID SINGLE OR COMPOSITION NSN 5330-00-245-5424
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: HW47
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• CROSS-SECTIONAL THICKNESS: 0.085 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN
• OUTSIDE DIAMETER: 5.010 INCHES MINIMUM AND 5.020 INCHES MAXIMUM IN
• HARDNESS RATING: 85.0 SHORE DUROMETER A MINIMUM AND 95.0 SHORE DUROMETER A MAXIMUM OVERALL
• CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
• STYLE DESIGNATOR: CIRCULAR
• MATERIAL: RUBBER SYNTHETIC OVERALL
• APERTURE DIAMETER: 4.805 INCHES MINIMUM AND 4.815 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL THICKNESS 0.085 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN OUTSIDE DIAMETER 5.010 INCHES MINIMUM AND 5.020 INCHES MAXIMUM IN HARDNESS RATING 85.0 SHORE DUROMETER A MINIMUM AND 95.0 SHORE DUROMETER A MAXIMUM OVERALL CROSS-SECTIONAL SHAPE STYLE SOLID SINGLE OR COMPOSITION STYLE DESIGNATOR CIRCULAR MATERIAL RUBBER SYNTHETIC OVERALL APERTURE DIAMETER 4.805 INCHES MINIMUM AND 4.815 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
6879 Interchangeable interchangeable cross-reference
interchangeable
60-8684 Interchangeable interchangeable cross-reference
interchangeable
8478 Interchangeable interchangeable cross-reference
interchangeable
AMS-QQ-A-200/11 Interchangeable interchangeable cross-reference
interchangeable
8536 Interchangeable interchangeable cross-reference
interchangeable
FU2789 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy HW47?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is HW47?
HW47 is a GASKET.
What parts can replace HW47?
There are 26 known substitutes for HW47: 6879, 60-8684, 8478 and 23 more. Substitute compatibility should be verified for your specific system.
Is HW47 still available?
HW47 is currently cancelled.