PartsTable
Technical Data Sheet
Download PDF

064444 — CAPACITOR,FIXED,CERAMIC DIELECTR

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

064444: CAPACITOR,FIXED,CERAMIC DIELECTR.

CAPACITOR,FIXED,CERAMIC DIELECTR. Key specifications include material: CERAMIC CASE, body_style: W/MTG BRACKET, TERMINAL(S) ON ONE END, body_width: 0.300 INCHES MAXIMUM IN, body_height: 0.125 INCHES MAXIMUM IN, body_length: 0.300 INCHES MAXIMUM IN, hardness_rating: 85.0 SHORE DUROMETER A MINIMUM AND 95.0 SHORE DUROMETER A MAXIMUM OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-245-5424, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 064444
NSN: 5330-00-245-5424
NIINs: 002455424, 012387738
FSC: 5330 — Packing and Gasket Materials
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
materialCERAMIC CASE
body_styleW/MTG BRACKET, TERMINAL(S) ON ONE END
body_width0.300 INCHES MAXIMUM IN
body_height0.125 INCHES MAXIMUM IN
body_length0.300 INCHES MAXIMUM IN
hardness_rating85.0 SHORE DUROMETER A MINIMUM AND 95.0 SHORE DUROMETER A MAXIMUM OVERALL
terminal_length1.250 INCHES MINIMUM IN
outside_diameter5.010 INCHES MINIMUM AND 5.020 INCHES MAXIMUM IN
style_designatorCIRCULAR
aperture_diameter4.805 INCHES MINIMUM AND 4.815 INCHES MAXIMUM IN
terminal_diameter0.020 INCHES NOMINAL IN
reliability_indicatorNOT ESTABLISHED
NSN5330-00-245-5424
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 064444 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.085 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN
•
HARDNESS RATING: 85.0 SHORE DUROMETER A MINIMUM AND 95.0 SHORE DUROMETER A MAXIMUM OVERALL
•
STYLE DESIGNATOR: CIRCULAR
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
OUTSIDE DIAMETER: 5.010 INCHES MINIMUM AND 5.020 INCHES MAXIMUM IN
•
APERTURE DIAMETER: 4.805 INCHES MINIMUM AND 4.815 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SYNTHETIC OVERALL
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.085 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN
HARDNESS RATING85.0 SHORE DUROMETER A MINIMUM AND 95.0 SHORE DUROMETER A MAXIMUM OVERALL
STYLE DESIGNATORCIRCULAR
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OUTSIDE DIAMETER5.010 INCHES MINIMUM AND 5.020 INCHES MAXIMUM IN
APERTURE DIAMETER4.805 INCHES MINIMUM AND 4.815 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC OVERALL
SUBSTITUTES & CROSS-REFERENCES 6
14602AReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
8536Reference document
Same NSN cross-reference
Reference document — Secondary reference
584GB15Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
HW47Reference document
Same NSN cross-reference
Reference document — Secondary reference
376MEV1Reference document
Same NSN cross-reference
Reference document — Secondary reference
17265AReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 064444?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 064444?
064444 is a CAPACITOR,FIXED,CERAMIC DIELECTR. It is classified as a MRO (MRO_GENERAL).
What parts can replace 064444?
There are 6 known substitutes for 064444: 14602A, 8536, 584GB15 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 064444?
064444 is cataloged in the U.S. Government catalog under NSN 5330-00-245-5424. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 064444

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.