PartsTable
Technical Data Sheet

2066-4 — Technical Data Sheet

✓ Verified by PartsTable
Hama · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

- For hiding tangled cables and a power strip<br>- Plastic box with cable slots on both sides for easy storage<br>- The devices remain connected<br>- Rubber feet for a steady hold<br>- Ideal for home and office and for using on a desk, TV, etc. This part is cataloged in the Federal Logistics Information System under NSN 5310-00-151-8938, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 2066-4
NSN: 5310-00-151-8938
FSC: 5310
CAGE: 96046 — CRANE PUMPS & SYSTEMS PFT CORP DIV CRANE PUMPS & SYSTEM PFT CORP. (USA)
SPECIFICATIONS
width36.000 INCHES MINIMUM AND 48.000 INCHES MAXIMUM IN
length36.000 INCHES MINIMUM AND 48.000 INCHES MAXIMUM IN
materialPLASTIC POLYVINYL CHLORIDE (PVC)
thickness0.016 INCHES NOMINAL IN
fiber_typeANIMAL OR PLANT
point_typeCONVENTIONAL
flexibilityFLEXIBLE
point_angle118.0 DEGREES NOMINAL
shank_styleSTRAIGHT ROUND
temp_rating-46.0 CELSIUS AND 70.0 CELSIUS DEGC
flute_length1.000 INCHES NOMINAL IN
flute_quantity2
NSN5310-00-151-8938
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 2066-4 · Hama ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
918 48InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
DBE48AInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
44118InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
60-306 PIECE 537InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
HHP96-1-64INInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
17-584InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVEGOVERNMENT REGISTRY
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2066-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2066-4?
2066-4 is a INSULATION SLEEVING,ELECTRICAL manufactured by Hama. It is classified as a MRO (MRO_GENERAL).
What parts can replace 2066-4?
There are 13 known substitutes for 2066-4: 918 48, DBE48A, 44118 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2066-4?
2066-4 is cataloged in the Federal Logistics Information System under NSN 5310-00-151-8938. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2066-4