PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 190676
190676 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PULLEY is a the manufacturer industrial component. Key specifications include end_item_identification: CAMERA SET,STILL PICTURE KS-99C. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-019-0676, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
190676
NSN: 5310-00-019-0676
FSC: 5310
CAGE: 21450 — ARMY WEAPONS COMMAND ATTN AMSWE-REE-S (USA)
SPECIFICATIONS
end_item_identificationCAMERA SET,STILL PICTURE KS-99C
NSN5310-00-019-0676
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 190676 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: COPPER ALLOY OVERALL
•
MATERIAL THICKNESS: 0.028 INCHES MINIMUM AND 0.034 INCHES MAXIMUM IN
•
HOLE DIAMETER: 0.320 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: FLAT INTERNAL TEETH
•
NONDEFINITIVE SPEC/STD DATA: A TYPE
•
OUTSIDE DIAMETER: 0.594 INCHES MINIMUM AND 0.610 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-750 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALCOPPER ALLOY OVERALL
MATERIAL THICKNESS0.028 INCHES MINIMUM AND 0.034 INCHES MAXIMUM IN
HOLE DIAMETER0.320 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN
STYLE DESIGNATORFLAT INTERNAL TEETH
NONDEFINITIVE SPEC/STD DATAA TYPE
OUTSIDE DIAMETER0.594 INCHES MINIMUM AND 0.610 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-B-750 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
ESP-F-1.321-PPInterchangeable
interchangeable cross-reference
interchangeable
877-014CInterchangeable
interchangeable cross-reference
interchangeable
4028-34-00Interchangeable
interchangeable cross-reference
interchangeable
MS35333-108Interchangeable
interchangeable cross-reference
interchangeable
373-3050-000Interchangeable
interchangeable cross-reference
interchangeable
MS35333-110Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 190676?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 190676?
190676 is a PULLEY.
What parts can replace 190676?
There are 24 known substitutes for 190676: ESP-F-1.321-PP, 877-014C, 4028-34-00 and 21 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 190676?
190676 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-019-0676. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 190676

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026