PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35333-110
MS35333-110 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,LOCK is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OVERALL, hole_diameter: 0.384 INCHES MINIMUM AND 0.398 INCHES MAXIMUM IN, outside_diameter: 0.670 INCHES MINIMUM AND 0.692 INCHES MAXIMUM IN, style_designator: FLAT INTERNAL TEETH, material_thickness: 0.032 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN, nondefinitive_spec/std_data: A TYPE. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-022-8847, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35333-110
NSN: 5310-00-022-8847
FSC: 5310
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
hole_diameter0.384 INCHES MINIMUM AND 0.398 INCHES MAXIMUM IN
outside_diameter0.670 INCHES MINIMUM AND 0.692 INCHES MAXIMUM IN
style_designatorFLAT INTERNAL TEETH
material_thickness0.032 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
nondefinitive_spec/std_dataA TYPE
material_document_and_classificationQQ-B-750 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5310-00-022-8847
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: MS35333-110 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOLE DIAMETER: 0.384 INCHES MINIMUM AND 0.398 INCHES MAXIMUM IN
•
NONDEFINITIVE SPEC/STD DATA: A TYPE
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-750 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: COPPER ALLOY OVERALL
•
MATERIAL THICKNESS: 0.032 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: FLAT INTERNAL TEETH
•
OUTSIDE DIAMETER: 0.670 INCHES MINIMUM AND 0.692 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
HOLE DIAMETER0.384 INCHES MINIMUM AND 0.398 INCHES MAXIMUM IN
NONDEFINITIVE SPEC/STD DATAA TYPE
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-B-750 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALCOPPER ALLOY OVERALL
MATERIAL THICKNESS0.032 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
STYLE DESIGNATORFLAT INTERNAL TEETH
OUTSIDE DIAMETER0.670 INCHES MINIMUM AND 0.692 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
ESP-F-1.321-PPInterchangeable
interchangeable cross-reference
interchangeable
877-014CInterchangeable
interchangeable cross-reference
interchangeable
4028-34-00Interchangeable
interchangeable cross-reference
interchangeable
92165A030Interchangeable
interchangeable cross-reference
interchangeable
MS35333-109Interchangeable
interchangeable cross-reference
interchangeable
FF-W-100CInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35333-110?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35333-110?
MS35333-110 is a WASHER,LOCK.
What parts can replace MS35333-110?
There are 25 known substitutes for MS35333-110: ESP-F-1.321-PP, 877-014C, 4028-34-00 and 22 more. Substitute compatibility should be verified for your specific system.
Is MS35333-110 still available?
MS35333-110 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35333-110

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026