PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35333-108
MS35333-108 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,LOCK is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OVERALL, hole_diameter: 0.256 INCHES MINIMUM AND 0.267 INCHES MAXIMUM IN, outside_diameter: 0.460 INCHES MINIMUM AND 0.478 INCHES MAXIMUM IN, style_designator: FLAT INTERNAL TEETH, material_thickness: 0.023 INCHES MINIMUM AND 0.028 INCHES MAXIMUM IN, end_item_identification: LOGISTICS SUPPORT VESSEL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-022-8834, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35333-108
NSN: 5310-00-022-8834
FSC: 5310
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
hole_diameter0.256 INCHES MINIMUM AND 0.267 INCHES MAXIMUM IN
outside_diameter0.460 INCHES MINIMUM AND 0.478 INCHES MAXIMUM IN
style_designatorFLAT INTERNAL TEETH
material_thickness0.023 INCHES MINIMUM AND 0.028 INCHES MAXIMUM IN
end_item_identificationLOGISTICS SUPPORT VESSEL
nondefinitive_spec/std_dataA TYPE
material_document_and_classificationQQ-B-750 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5310-00-022-8834
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: MS35333-108 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL THICKNESS: 0.023 INCHES MINIMUM AND 0.028 INCHES MAXIMUM IN
•
NONDEFINITIVE SPEC/STD DATA: A TYPE
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-750 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
HOLE DIAMETER: 0.256 INCHES MINIMUM AND 0.267 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 0.460 INCHES MINIMUM AND 0.478 INCHES MAXIMUM IN
•
MATERIAL: COPPER ALLOY OVERALL
•
STYLE DESIGNATOR: FLAT INTERNAL TEETH
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL THICKNESS0.023 INCHES MINIMUM AND 0.028 INCHES MAXIMUM IN
NONDEFINITIVE SPEC/STD DATAA TYPE
END ITEM IDENTIFICATIONLOGISTICS SUPPORT VESSEL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-B-750 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
HOLE DIAMETER0.256 INCHES MINIMUM AND 0.267 INCHES MAXIMUM IN
OUTSIDE DIAMETER0.460 INCHES MINIMUM AND 0.478 INCHES MAXIMUM IN
MATERIALCOPPER ALLOY OVERALL
STYLE DESIGNATORFLAT INTERNAL TEETH
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
1224Interchangeable
interchangeable cross-reference
interchangeable
1229G423Interchangeable
interchangeable cross-reference
interchangeable
115551Interchangeable
interchangeable cross-reference
interchangeable
5310PL0652572Interchangeable
interchangeable cross-reference
interchangeable
MS35333-33Interchangeable
interchangeable cross-reference
interchangeable
MILW6986Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35333-108?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35333-108?
MS35333-108 is a WASHER,LOCK.
What parts can replace MS35333-108?
There are 26 known substitutes for MS35333-108: 1224, 1229G423, 115551 and 23 more. Substitute compatibility should be verified for your specific system.
Is MS35333-108 still available?
MS35333-108 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35333-108

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026