PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 17621
17621 ✓ Verified by PartsTable
InLine · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

<b>InLine® HDMI cable, HDMI High Speed, male / male, with ferrite</b><b>HDMI 1.3:</b><br> This InLine HDMI cable with specification 1.3 is suitable for HD content up to 1080p. If no higher resolution is supported by the connected devices, this cable is sufficient to connect a TV or monitor to a Blu-ray player, games console, computer, notebook or streaming device in HD quality.<br><br><b>Business:</b>Use this cable to connect your PC or laptop to a monitor. Everyday computer tasks or simple multimedia applications such as watching videos or editing images are fully supported.<br><br><b>Television:</b>Connect your TV to a cable and satellite receiver to watch a wide range of channels in high quality (Full HD).<br><br><b>Playback devices:</b>Full HD monitors, projectors and televisions.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-205-8249, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
17621
NSN: 5310-00-205-8249
FSC: 5310
CAGE: 93232 — CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION DBA CURTISS WRIGHT ENGINEERED PUMP DIVISION USE CAGE CODE 0UBG9 FOR CATALOGING (USA)
SPECIFICATIONS
angle38.0 DEGREES
colorBLACK FIRST POSITION COVER ALL CONDUCTORS
materialPLASTIC VINYL FIRST POSITION JACKET ALL CONDUCTORS
hole_diameter1.792 INCHES MINIMUM AND 1.817 INCHES MAXIMUM IN
nominal_width0.500 INCHES IN
conductor_formSTRANDED ALL CONDUCTORS
overall_length9.833 FEET FT
outside_diameter5.469 INCHES MINIMUM AND 5.555 INCHES MAXIMUM IN
special_featuresTRAP JAR, FUEL RESIDUE
style_designatorINTERNAL CONNECTOR AND STRIPPED
surface_treatmentCADMIUM AND CHROMATE OR ZINC AND CHROMATE OVERALL
conductor_quantity3
NSN5310-00-205-8249
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 17621 · InLine ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OR ZINC AND CHROMATE OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD ALL MATERIAL RESPONSES OVERALL
•
MATERIAL: STEEL COMP 1010 OR STEEL COMP 1035 OVERALL
•
OVERALL DISTANCE INCLUDING KEYS: 2.734 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 3 FED SPEC 1ST TREATMENT RESPONSE OR ASTM B633,TYPE 2,CLASS 3 ASSN STD 2ND TREATMENT RESPONSE OVERALL
•
OUTSIDE DIAMETER: 2.281 INCHES MINIMUM AND 2.311 INCHES MAXIMUM IN
•
INTERNAL PREBENT KEY LENGTH: 0.125 INCHES MINIMUM AND 0.156 INCHES MAXIMUM IN
TYPICAL APPLICATIONS
  • Server Internal Cabling
  • Data Center Cable Infrastructure
  • SAS/SATA Drive Connectivity
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENTCADMIUM AND CHROMATE OR ZINC AND CHROMATE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD ALL MATERIAL RESPONSES OVERALL
MATERIALSTEEL COMP 1010 OR STEEL COMP 1035 OVERALL
OVERALL DISTANCE INCLUDING KEYS2.734 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 3 FED SPEC 1ST TREATMENT RESPONSE OR ASTM B633,TYPE 2,CLASS 3 ASSN STD 2ND TREATMENT RESPONSE OVERALL
OUTSIDE DIAMETER2.281 INCHES MINIMUM AND 2.311 INCHES MAXIMUM IN
INTERNAL PREBENT KEY LENGTH0.125 INCHES MINIMUM AND 0.156 INCHES MAXIMUM IN
END ITEM IDENTIFICATIONMULTIPLE LAUNCH ROCKET SYSTEM (MLRS); ARMORED MULTI-PURPOSE VEHICLE (AMPV)
INTERNAL PREBENT KEY WIDTH0.250 INCHES MINIMUM AND 0.290 INCHES MAXIMUM IN
MATERIAL THICKNESS0.053 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
W09Interchangeable
interchangeable cross-reference
interchangeable
E2645PC30Interchangeable
interchangeable cross-reference
interchangeable
35515PC14Interchangeable
interchangeable cross-reference
interchangeable
M-3151 PIECE NO 8Interchangeable
interchangeable cross-reference
interchangeable
103717Interchangeable
interchangeable cross-reference
interchangeable
PRP568-252-457-60Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 17621?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 17621?
17621 is a CABLE ASSEMBLY,POWER,ELECTRICAL manufactured by InLine.
What parts can replace 17621?
There are 22 known substitutes for 17621: W09, E2645PC30, 35515PC14 and 19 more. Substitute compatibility should be verified for your specific system.
Is 17621 still available?
17621 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 17621

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026