PartsTable
Technical Data Sheet
Download PDF

E2645PC30 — WASHER,KEY

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

E2645PC30: WASHER,KEY.

The WASHER,KEY is a the manufacturer industrial component. Key specifications include hole_diameter: 1.792 INCHES MINIMUM AND 1.817 INCHES MAXIMUM IN, hardness_rating: 50.0 ROCKWELL B MINIMUM AND 81.0 ROCKWELL B MAXIMUM, outside_diameter: 2.281 INCHES MINIMUM AND 2.311 INCHES MAXIMUM IN, style_designator: KEY, material_thickness: 0.053 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN, external_key_quantity: 17. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-186-0968, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
E2645PC30
NSN: 5310-00-186-0968
FSC: 5310 — Nuts and Washers
CAGE: 59560 — TERRY CORP OF CONNECTICUT SUB OF INGERSOLL-RAND CO (USA)
SPECIFICATIONS
hole_diameter1.792 INCHES MINIMUM AND 1.817 INCHES MAXIMUM IN
hardness_rating50.0 ROCKWELL B MINIMUM AND 81.0 ROCKWELL B MAXIMUM
outside_diameter2.281 INCHES MINIMUM AND 2.311 INCHES MAXIMUM IN
style_designatorKEY
material_thickness0.053 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN
external_key_quantity17
external_prebent_key_width0.200 INCHES MINIMUM AND 0.234 INCHES MAXIMUM IN
internal_prebent_key_width0.250 INCHES MINIMUM AND 0.290 INCHES MAXIMUM IN
internal_prebent_key_length0.125 INCHES MINIMUM AND 0.166 INCHES MAXIMUM IN
overall_distance_including_keys2.734 INCHES MAXIMUM IN
material_document_and_classificationFED STD 66 FED STD ALL MATERIAL RESPONSES OVERALL
NSN5310-00-186-0968
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: E2645PC30 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INTERNAL PREBENT KEY WIDTH: 0.250 INCHES MINIMUM AND 0.290 INCHES MAXIMUM IN
•
OVERALL DISTANCE INCLUDING KEYS: 2.734 INCHES MAXIMUM IN
•
HARDNESS RATING: 50.0 ROCKWELL B MINIMUM AND 81.0 ROCKWELL B MAXIMUM
•
STYLE DESIGNATOR: KEY
•
MATERIAL DOCUMENT AND CLASSIFICATION: FED STD 66 FED STD ALL MATERIAL RESPONSES OVERALL
•
OUTSIDE DIAMETER: 2.281 INCHES MINIMUM AND 2.311 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.053 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN
•
EXTERNAL KEY QUANTITY: 17
TECHNICAL CHARACTERISTICS
INTERNAL PREBENT KEY WIDTH0.250 INCHES MINIMUM AND 0.290 INCHES MAXIMUM IN
OVERALL DISTANCE INCLUDING KEYS2.734 INCHES MAXIMUM IN
HARDNESS RATING50.0 ROCKWELL B MINIMUM AND 81.0 ROCKWELL B MAXIMUM
STYLE DESIGNATORKEY
MATERIAL DOCUMENT AND CLASSIFICATIONFED STD 66 FED STD ALL MATERIAL RESPONSES OVERALL
OUTSIDE DIAMETER2.281 INCHES MINIMUM AND 2.311 INCHES MAXIMUM IN
MATERIAL THICKNESS0.053 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN
EXTERNAL KEY QUANTITY17
INTERNAL PREBENT KEY LENGTH0.125 INCHES MINIMUM AND 0.166 INCHES MAXIMUM IN
EXTERNAL PREBENT KEY WIDTH0.200 INCHES MINIMUM AND 0.234 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 9
W09Reference document
Same NSN cross-reference
Reference document — Secondary reference
35515PC14Reference document
Same NSN cross-reference
Reference document — Secondary reference
20555PCM735Reference document
Same NSN cross-reference
Reference document — Secondary reference
G10090PC21Reference document
Same NSN cross-reference
Reference document — Secondary reference
3090-9PC27Reference document
Same NSN cross-reference
Reference document — Secondary reference
G8953PC09Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy E2645PC30?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is E2645PC30?
E2645PC30 is a WASHER,KEY.
What parts can replace E2645PC30?
There are 9 known substitutes for E2645PC30: W09, 35515PC14, 20555PCM735 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for E2645PC30?
E2645PC30 is cataloged in the U.S. Government catalog under NSN 5310-00-186-0968. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — E2645PC30

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.