PartsTable
Technical Data Sheet
PartsTable / COMPONENT / M-3151 PIECE NO 8
M-3151 PIECE NO 8 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,LOCK is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, hole_diameter: 1.772 INCHES NOMINAL IN, outside_diameter: 2.634 INCHES NOMINAL IN, style_designator: FLAT EXTERNAL TEETH, material_thickness: 0.068 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-194-0023, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M-3151 PIECE NO 8
NSN: 5310-00-194-0023
FSC: 5310
CAGE: 46175 — PEERLESS-WINSMITH, INC. DBA PEERLESS WINSMITH (USA)
SPECIFICATIONS
materialSTEEL OVERALL
hole_diameter1.772 INCHES NOMINAL IN
outside_diameter2.634 INCHES NOMINAL IN
style_designatorFLAT EXTERNAL TEETH
material_thickness0.068 INCHES NOMINAL IN
NSN5310-00-194-0023
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: M-3151 PIECE NO 8 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 2.634 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: FLAT EXTERNAL TEETH
•
HOLE DIAMETER: 1.772 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.068 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER2.634 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
STYLE DESIGNATORFLAT EXTERNAL TEETH
HOLE DIAMETER1.772 INCHES NOMINAL IN
MATERIAL THICKNESS0.068 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
W09Interchangeable
interchangeable cross-reference
interchangeable
E2645PC30Interchangeable
interchangeable cross-reference
interchangeable
35515PC14Interchangeable
interchangeable cross-reference
interchangeable
SKF-W-09Interchangeable
interchangeable cross-reference
interchangeable
PL999F0742 PC 37Interchangeable
interchangeable cross-reference
interchangeable
103717Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy M-3151 PIECE NO 8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M-3151 PIECE NO 8?
M-3151 PIECE NO 8 is a WASHER,LOCK.
What parts can replace M-3151 PIECE NO 8?
There are 8 known substitutes for M-3151 PIECE NO 8: W09, E2645PC30, 35515PC14 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for M-3151 PIECE NO 8?
M-3151 PIECE NO 8 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-194-0023. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M-3151 PIECE NO 8

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026