PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 13207E2948FN33
13207E2948FN33 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.406 INCHES NOMINAL IN, material: RUBBER SYNTHETIC CUSHION, overall_width: 0.625 INCHES NOMINAL IN, style_designator: SINGLE LOOP, surface_treatment: CADMIUM OR ZINC AND CHROMATE BAND, material_thickness: 0.032 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-050-9077, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
13207E2948FN33
NSN: 5340-00-050-9077
FSC: 5340
CAGE: 97403 — CECOM LR CENTER (USA)
SPECIFICATIONS
diameter0.406 INCHES NOMINAL IN
materialRUBBER SYNTHETIC CUSHION
overall_width0.625 INCHES NOMINAL IN
style_designatorSINGLE LOOP
surface_treatmentCADMIUM OR ZINC AND CHROMATE BAND
material_thickness0.032 INCHES NOMINAL IN
loop_inside_diameter0.250 INCHES NOMINAL IN
end_item_identificationMULTIPLE LAUNCH ROCKET SYSTEM (MLRS); A4 BRADLEY FIGHTING VEHICLE; A3 BRADLEY FIGHTING VEHICLE
material_document_and_classificationAISI C1005 THRU C1020 ASSN STD SINGLE MATERIAL RESPONSE OR SAE 1006 THRU 1020 ASSN STD SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end1.031 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.719 INCHES NOMINAL IN
NSN5340-00-050-9077
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 13207E2948FN33 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SINGLE LOOP
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.031 INCHES NOMINAL IN
•
MATERIAL: STEEL BAND
•
SURFACE TREATMENT: CADMIUM OR ZINC AND CHROMATE BAND
•
LOOP INSIDE DIAMETER: 0.250 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.032 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI C1005 THRU C1020 ASSN STD SINGLE MATERIAL RESPONSE OR SAE 1006 THRU 1020 ASSN STD SINGLE MATERIAL RESPONSE BAND
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORSINGLE LOOP
END ITEM IDENTIFICATIONMULTIPLE LAUNCH ROCKET SYSTEM (MLRS); A4 BRADLEY FIGHTING VEHICLE; A3 BRADLEY FIGHTING VEHICLE
DISTANCE FROM LOOP CENTER TO TONGUE END1.031 INCHES NOMINAL IN
MATERIALSTEEL BAND
SURFACE TREATMENTCADMIUM OR ZINC AND CHROMATE BAND
LOOP INSIDE DIAMETER0.250 INCHES NOMINAL IN
MATERIAL THICKNESS0.032 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONAISI C1005 THRU C1020 ASSN STD SINGLE MATERIAL RESPONSE OR SAE 1006 THRU 1020 ASSN STD SINGLE MATERIAL RESPONSE BAND
OVERALL WIDTH0.625 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.719 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
MS21333-27Upgraded Successor
successor cross-reference
successor
NASM21333Upgraded Successor
successor cross-reference
successor
MS21333-10Upgraded Successor
successor cross-reference
successor
NASM21333-10Upgraded Successor
successor cross-reference
successor
5340000509077Interchangeable
Same NIIN cross-reference
interchangeable
MS21333-119Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 13207E2948FN33?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 13207E2948FN33?
13207E2948FN33 is a CLAMP,LOOP.
What parts can replace 13207E2948FN33?
There are 10 known substitutes for 13207E2948FN33: MS21333-27, NASM21333, MS21333-10 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 13207E2948FN33?
13207E2948FN33 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-050-9077. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 13207E2948FN33

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026