PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 116C3149-6
116C3149-6 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_diameter: 0.6250 INCHES NOMINAL IN, overall_width: 0.4375 INCHES NOMINAL IN, alignment_type: RIGID, surface_finish: GROUND, special_features: OPEN END,EXTRA CAPACITY OUTER RACE,OIL HOLE IN OUTER RACE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-142-6288, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
116C3149-6
NSN: 3110-00-142-6288
FSC: 3110
CAGE: 05606 — GENERAL DYNAMICS-OTS, INC. DIV ORDNANCE AND TACTICAL SYSTEMS (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_diameter0.6250 INCHES NOMINAL IN
overall_width0.4375 INCHES NOMINAL IN
alignment_typeRIGID
surface_finishGROUND
special_featuresOPEN END,EXTRA CAPACITY OUTER RACE,OIL HOLE IN OUTER RACE
style_designatorNON-SEPARABLE, OPEN END, DRAWN SHELL
overall_outside_diameter0.8125 INCHES NOMINAL IN
standard_tolerance_designationAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
NSN3110-00-142-6288
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 116C3149-6 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL OUTSIDE DIAMETER: 0.8125 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
•
STYLE DESIGNATOR: NON-SEPARABLE, OPEN END, DRAWN SHELL
•
ALIGNMENT TYPE: RIGID
•
BORE DIAMETER: 0.6250 INCHES NOMINAL IN
•
SURFACE FINISH: GROUND
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL OUTSIDE DIAMETER0.8125 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
STYLE DESIGNATORNON-SEPARABLE, OPEN END, DRAWN SHELL
SPECIAL FEATURESOPEN END,EXTRA CAPACITY OUTER RACE,OIL HOLE IN OUTER RACE
ALIGNMENT TYPERIGID
BORE DIAMETER0.6250 INCHES NOMINAL IN
SURFACE FINISHGROUND
MATERIALSTEEL OVERALL
OVERALL WIDTH0.4375 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 33
359950R91Interchangeable
interchangeable cross-reference
interchangeable
A24501-12Interchangeable
interchangeable cross-reference
interchangeable
MS17131Interchangeable
interchangeable cross-reference
interchangeable
8130869Interchangeable
interchangeable cross-reference
interchangeable
A28229Interchangeable
interchangeable cross-reference
interchangeable
9090295Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 116C3149-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 116C3149-6?
116C3149-6 is a BEARING,ROLLER,NEEDLE.
What parts can replace 116C3149-6?
There are 33 known substitutes for 116C3149-6: 359950R91, A24501-12, MS17131 and 30 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 116C3149-6?
116C3149-6 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-142-6288. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 116C3149-6

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026