PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 11588725
11588725 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

SEAL,NONMETALLIC SPECIAL SHAPED. Key specifications include material: STEEL PROPERTY CLASS 8.8 OVERALL, head_style: HEXAGON EXTENDED WASHER, head_height: 8.4 MILLIMETERS NOMINAL MM, thread_length: 22.0 MILLIMETERS NOMINAL MM, fastener_length: 35.0 MILLIMETERS NOMINAL MM, thread_direction: RIGHT-HAND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-919-7264, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
11588725
NSN: 5330-00-919-7264
FSC: 5330
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialSTEEL PROPERTY CLASS 8.8 OVERALL
head_styleHEXAGON EXTENDED WASHER
head_height8.4 MILLIMETERS NOMINAL MM
thread_length22.0 MILLIMETERS NOMINAL MM
fastener_length35.0 MILLIMETERS NOMINAL MM
thread_directionRIGHT-HAND
width_between_flats9.9 MILLIMETERS NOMINAL MM
end_item_identification01-653-6516
nominal_thread_diameter8.0 MILLIMETERS MM
extended_washer_diameter18.0 MILLIMETERS NOMINAL MM
thread_series_designatorM
thread_pitch_in_millimeters1.25
NSN5330-00-919-7264
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 11588725 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.812 INCHES NOMINAL IN
•
CROSS SECTION INSIDE DIAMETER: 0.187 INCHES NOMINAL IN
•
CONSTRUCTION: SOLID
•
ATTACHMENT METHOD: CEMENTED
•
CROSS-SECTIONAL WIDTH: 0.656 INCHES NOMINAL IN
•
FABRICATION METHOD: SOLID
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.812 INCHES NOMINAL IN
CROSS SECTION INSIDE DIAMETER0.187 INCHES NOMINAL IN
CONSTRUCTIONSOLID
OVERALL LENGTH106.000 INCHES NOMINAL IN
ATTACHMENT METHODCEMENTED
CROSS-SECTIONAL WIDTH0.656 INCHES NOMINAL IN
FABRICATION METHODSOLID
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
MIL-STD-417AGR SC512ABFInterchangeable
interchangeable cross-reference
interchangeable
MIL-R-3065EInterchangeable
interchangeable cross-reference
interchangeable
00737SH 25 ST 164Interchangeable
interchangeable cross-reference
interchangeable
367486PC5Interchangeable
interchangeable cross-reference
interchangeable
734913PC27Interchangeable
interchangeable cross-reference
interchangeable
734913-27Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 11588725?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11588725?
11588725 is a SEAL,NONMETALLIC SPECIAL SHAPED.
What parts can replace 11588725?
There are 15 known substitutes for 11588725: MIL-STD-417AGR SC512ABF, MIL-R-3065E, 00737SH 25 ST 164 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 11588725?
11588725 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-919-7264. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11588725

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026