PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 367486PC5
367486PC5 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, thickness: 0.052 INCHES MINIMUM AND 0.072 INCHES MAXIMUM IN, hole_diameter: 0.437 INCHES NOMINAL IN, overall_diameter: 1.000 INCHES NOMINAL IN, peripheral_shape_style: ROUND, center_hole_shape_style: ROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-254-1660, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
367486PC5
NSN: 5310-00-254-1660
FSC: 5310
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
thickness0.052 INCHES MINIMUM AND 0.072 INCHES MAXIMUM IN
hole_diameter0.437 INCHES NOMINAL IN
overall_diameter1.000 INCHES NOMINAL IN
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
material_document_and_classification417,GR SB415 MIL STD SINGLE MATERIAL RESPONSE OVERALL
NSN5310-00-254-1660
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 367486PC5 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER SYNTHETIC OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
•
HOLE DIAMETER: 0.437 INCHES NOMINAL IN
•
PERIPHERAL SHAPE STYLE: ROUND
•
OVERALL DIAMETER: 1.000 INCHES NOMINAL IN
•
THICKNESS: 0.052 INCHES MINIMUM AND 0.072 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: 417,GR SB415 MIL STD SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER SYNTHETIC OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER0.437 INCHES NOMINAL IN
PERIPHERAL SHAPE STYLEROUND
OVERALL DIAMETER1.000 INCHES NOMINAL IN
THICKNESS0.052 INCHES MINIMUM AND 0.072 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
MATERIAL DOCUMENT AND CLASSIFICATION417,GR SB415 MIL STD SINGLE MATERIAL RESPONSE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
MIL-STD-417AGR SC512ABFInterchangeable
interchangeable cross-reference
interchangeable
MIL-R-3065EInterchangeable
interchangeable cross-reference
interchangeable
00737SH 25 ST 164Interchangeable
interchangeable cross-reference
interchangeable
734913PC27Interchangeable
interchangeable cross-reference
interchangeable
734913-27Interchangeable
interchangeable cross-reference
interchangeable
MIL-STD-417AInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 367486PC5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 367486PC5?
367486PC5 is a WASHER,FLAT.
What parts can replace 367486PC5?
There are 15 known substitutes for 367486PC5: MIL-STD-417AGR SC512ABF, MIL-R-3065E, 00737SH 25 ST 164 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 367486PC5?
367486PC5 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-254-1660. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 367486PC5

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026