PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 00737SH 25 ST 164
00737SH 25 ST 164 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER CHLOROPRENE CLASS CR OVERALL, hardness_rating: 55.0 SHORE DUROMETER A MINIMUM AND 65.0 SHORE DUROMETER A MAXIMUM OVERALL, outside_diameter: 1.000 INCHES NOMINAL IN, style_designator: CIRCULAR, aperture_diameter: 0.375 INCHES NOMINAL IN, maximum_pressure_rating: 800.0 POUNDS PER SQUARE INCH (PSI) LBS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-165-1848, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
00737SH 25 ST 164
NSN: 5330-00-165-1848
FSC: 5330
CAGE: 14153 — DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA (USA)
SPECIFICATIONS
materialRUBBER CHLOROPRENE CLASS CR OVERALL
hardness_rating55.0 SHORE DUROMETER A MINIMUM AND 65.0 SHORE DUROMETER A MAXIMUM OVERALL
outside_diameter1.000 INCHES NOMINAL IN
style_designatorCIRCULAR
aperture_diameter0.375 INCHES NOMINAL IN
maximum_pressure_rating800.0 POUNDS PER SQUARE INCH (PSI) LBS
cross-sectional_thickness0.250 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationASTM D2000 2BC614 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-165-1848
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 00737SH 25 ST 164 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.094 INCHES NOMINAL IN
•
APERTURE DIAMETER: 0.109 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CIRCULAR
•
OUTSIDE DIAMETER: 0.438 INCHES NOMINAL IN
•
HARDNESS RATING: 45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM D2000 2BC515ABF1 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: RUBBER CHLOROPRENE CLASS CR OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL THICKNESS0.094 INCHES NOMINAL IN
APERTURE DIAMETER0.109 INCHES NOMINAL IN
STYLE DESIGNATORCIRCULAR
OUTSIDE DIAMETER0.438 INCHES NOMINAL IN
HARDNESS RATING45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
MATERIAL DOCUMENT AND CLASSIFICATIONASTM D2000 2BC515ABF1 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALRUBBER CHLOROPRENE CLASS CR OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
MIL-R-3065EInterchangeable
interchangeable cross-reference
interchangeable
367486PC5Interchangeable
interchangeable cross-reference
interchangeable
734913PC27Interchangeable
interchangeable cross-reference
interchangeable
734913-27Interchangeable
interchangeable cross-reference
interchangeable
D346-268Interchangeable
interchangeable cross-reference
interchangeable
82628ASPC82632AInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 00737SH 25 ST 164?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 00737SH 25 ST 164?
00737SH 25 ST 164 is a GASKET.
What parts can replace 00737SH 25 ST 164?
There are 20 known substitutes for 00737SH 25 ST 164: MIL-R-3065E, 367486PC5, 734913PC27 and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 00737SH 25 ST 164?
00737SH 25 ST 164 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-165-1848. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 00737SH 25 ST 164

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026