PartsTable
Technical Data Sheet
Download PDF

1000-0060-6CP — PACKING,PREFORMED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

1000-0060-6CP: PACKING,PREFORMED.

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, hardness_rating: 70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM, center_hole_diameter: 0.114 INCHES NOMINAL IN, cross-sectional_height: 0.070 INCHES NOMINAL IN, end_item_identification: SP 8MH, departure_from_cited_document: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-350-3173, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1000-0060-6CP
NSN: 5331-01-350-3173
NIINs: 013503173, 013816557
FSC: 5331 — O-ring
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM
hardness_rating70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM
center_hole_diameter0.114 INCHES NOMINAL IN
cross-sectional_height0.070 INCHES NOMINAL IN
end_item_identificationSP 8MH
departure_from_cited_documentCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
criticality_code_justificationZZZY
material_document_and_classificationMIL-R-83248 MIL SPEC SINGLE MATERIAL RESPONSE
reference_number_differentiating_characteristicsCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
NSN5331-01-350-3173
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1000-0060-6CP MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.070 INCHES NOMINAL IN
•
HARDNESS RATING: 70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM
•
CRITICALITY CODE JUSTIFICATION: ZZZW
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-83248 MIL SPEC SINGLE MATERIAL RESPONSE
•
DEPARTURE FROM CITED DOCUMENT: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
•
CENTER HOLE DIAMETER: 0.114 INCHES NOMINAL IN
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.070 INCHES NOMINAL IN
HARDNESS RATING70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM
CRITICALITY CODE JUSTIFICATIONZZZW
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-83248 MIL SPEC SINGLE MATERIAL RESPONSE
DEPARTURE FROM CITED DOCUMENTCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
CENTER HOLE DIAMETER0.114 INCHES NOMINAL IN
MATERIALRUBBER FLUOROCARBON CLASS FPM
SUBSTITUTES & CROSS-REFERENCES 6
MIL-R-83248/1-006CPReference document
Same NSN cross-reference
Reference document — Secondary reference
AS3209-006CPReference document
Same NSN cross-reference
Reference document — Design control — primary reference
SAE-AMS7276Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
M83248/1-006CPReference document
Same NSN cross-reference
Reference document — Secondary reference
MIL-R-83248/1-006Reference document
Same NSN cross-reference
Reference document — Secondary reference
MIL-R-83248Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 1000-0060-6CP?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1000-0060-6CP?
1000-0060-6CP is a PACKING,PREFORMED.
What parts can replace 1000-0060-6CP?
There are 6 known substitutes for 1000-0060-6CP: MIL-R-83248/1-006CP, AS3209-006CP, SAE-AMS7276 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1000-0060-6CP?
1000-0060-6CP is cataloged in the U.S. Government catalog under NSN 5331-01-350-3173. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1000-0060-6CP

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.