MIL-R-83248/1-006 — O-RING

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

MIL-R-83248/1-006: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, hardness_rating: 70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM, center_hole_diameter: 0.114 INCHES NOMINAL IN, cross-sectional_height: 0.070 INCHES NOMINAL IN, departure_from_cited_document: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D, criticality_code_justification: ZZZW. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-166-0963, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MIL-R-83248/1-006

NSN: 5331-00-166-0963
NIINs: 001660963, 013503173
FSC: 5331 — O-ring
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)

SPECIFICATIONS

material	RUBBER FLUOROCARBON CLASS FPM
hardness_rating	70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM
center_hole_diameter	0.114 INCHES NOMINAL IN
cross-sectional_height	0.070 INCHES NOMINAL IN
departure_from_cited_document	CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
criticality_code_justification	ZZZW
material_document_and_classification	MIL-R-83248 MIL SPEC SINGLE MATERIAL RESPONSE
NSN	5331-00-166-0963

COMPONENT DIAGRAM

KEY FEATURES

•

TEMP RATING: -15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF

•

CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN

•

OUTSIDE DIAMETER: 0.243 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN

•

HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL

•

ELONGATION PERCENTAGE: 125 MAXIMUM

•

CENTER HOLE DIAMETER: 0.108 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN

•

MATERIAL: RUBBER FLUOROCARBON CLASS FPM

TECHNICAL CHARACTERISTICS

TEMP RATING	-15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT	0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
OUTSIDE DIAMETER	0.243 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
HARDNESS RATING	75.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE	125 MAXIMUM
CENTER HOLE DIAMETER	0.108 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
MATERIAL	RUBBER FLUOROCARBON CLASS FPM

SUBSTITUTES & CROSS-REFERENCES 9

2-6-77-545Reference document

Same NSN cross-reference

Reference document — Secondary reference

SAE-AS83248/1Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

54-66-1006BSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

2-006V1226-75Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

R1309P006Reference document

Same NSN cross-reference

Reference document — Secondary reference

970--41705-TD ITEM 1.42.5Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required

Ready to buy MIL-R-83248/1-006?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is MIL-R-83248/1-006?

MIL-R-83248/1-006 is a O-RING.

What parts can replace MIL-R-83248/1-006?

There are 9 known substitutes for MIL-R-83248/1-006: 2-6-77-545, SAE-AS83248/1, 54-66-1006B and 6 more. Substitute compatibility should be verified for your specific system.

What is the NSN for MIL-R-83248/1-006?

MIL-R-83248/1-006 is cataloged in the U.S. Government catalog under NSN 5331-00-166-0963. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

MIL-R-83248/1-006 — O-RING

Request a Quote — MIL-R-83248/1-006