PartsTable
Technical Data Sheet
PartsTable / MRO / 054246
054246 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include material: COPPER ALLOY CONTACT, body_style: CLIP CONNECTED TYPE, overall_width: 8.594 INCHES NOMINAL IN, base_thickness: 0.250 INCHES NOMINAL IN, overall_height: 0.988 INCHES NOMINAL IN, overall_length: 2.750 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0672, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 054246
NSN: 3110-00-100-0672
FSC: 3110
CAGE: 6N299 — AGCO CORP PARTS OPN (USA)
SPECIFICATIONS
materialCOPPER ALLOY CONTACT
body_styleCLIP CONNECTED TYPE
overall_width8.594 INCHES NOMINAL IN
base_thickness0.250 INCHES NOMINAL IN
overall_height0.988 INCHES NOMINAL IN
overall_length2.750 INCHES NOMINAL IN
voltage_in_volts250.0
precious_materialSILVER
surface_treatmentSILVER CONTACT
mounting_hole_styleIN-LINE ALONG THE WIDTH
mounting_hole_diameter0.142 INCHES NOMINAL IN
mounting_hole_quantity9
NSN3110-00-100-0672
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 054246 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
103723Interchangeable
interchangeable cross-reference
interchangeable
HL12364SH2-251Interchangeable
interchangeable cross-reference
interchangeable
X17095Interchangeable
interchangeable cross-reference
interchangeable
16409SInterchangeable
interchangeable cross-reference
interchangeable
R20932Interchangeable
interchangeable cross-reference
interchangeable
A782Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 054246?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 054246?
054246 is a CONE AND ROLLERS,TAPERED ROLLER. It is classified as a MRO (MRO_GENERAL).
What parts can replace 054246?
There are 22 known substitutes for 054246: 103723, HL12364SH2-251, X17095 and 19 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 054246?
054246 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0672. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 054246

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026