PartsTable
Technical Data Sheet
PartsTable / COMPONENT / X17095
X17095 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, first_end_style: CHAMFERED, pin_overall_length: 0.863 INCHES MINIMUM AND 0.887 INCHES MAXIMUM IN, pin_overall_diameter: 0.1855 INCHES MINIMUM AND 0.1875 INCHES MAXIMUM IN, first_end_taper_angle: 25.0 DEGREES NOMINAL, first_end_taper_length: 0.016 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-010-3723, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
X17095
NSN: 5315-00-010-3723
FSC: 5315
CAGE: 14351 — TELEDYNE CONTINENTAL MOTORS INDUSTRIAL PRODUCTS DIV TELEDYNE INDUSTRIES INC SUB OF TELEDYNE INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
first_end_styleCHAMFERED
pin_overall_length0.863 INCHES MINIMUM AND 0.887 INCHES MAXIMUM IN
pin_overall_diameter0.1855 INCHES MINIMUM AND 0.1875 INCHES MAXIMUM IN
first_end_taper_angle25.0 DEGREES NOMINAL
first_end_taper_length0.016 INCHES NOMINAL IN
material_document_and_classificationQQ-S-633,FS1010 TO FS1030 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
second_end_relationship_with_first_endIDENTICAL
NSN5315-00-010-3723
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: X17095 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
FIRST END STYLE: CHAMFERED
•
PIN OVERALL LENGTH: 0.863 INCHES MINIMUM AND 0.887 INCHES MAXIMUM IN
•
PIN OVERALL DIAMETER: 0.1855 INCHES MINIMUM AND 0.1875 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633,FS1010 TO FS1030 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
FIRST END TAPER LENGTH: 0.016 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
FIRST END TAPER ANGLE: 25.0 DEGREES NOMINAL
TECHNICAL CHARACTERISTICS (FLIS)
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
FIRST END STYLECHAMFERED
PIN OVERALL LENGTH0.863 INCHES MINIMUM AND 0.887 INCHES MAXIMUM IN
PIN OVERALL DIAMETER0.1855 INCHES MINIMUM AND 0.1875 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-633,FS1010 TO FS1030 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
FIRST END TAPER LENGTH0.016 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
FIRST END TAPER ANGLE25.0 DEGREES NOMINAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
144EX29Interchangeable
interchangeable cross-reference
interchangeable
665Interchangeable
interchangeable cross-reference
interchangeable
2CR440Interchangeable
interchangeable cross-reference
interchangeable
103723Interchangeable
interchangeable cross-reference
interchangeable
224861-001Interchangeable
interchangeable cross-reference
interchangeable
HL12364SH2-251Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy X17095?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is X17095?
X17095 is a PIN,STRAIGHT,HEADLESS.
What parts can replace X17095?
There are 8 known substitutes for X17095: 144EX29, 665, 2CR440 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for X17095?
X17095 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-010-3723. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — X17095

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026