PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 103723
103723 ✓ Verified by PartsTable
Hama · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

- For an SLR camera with zoom lens.<br>- Made of Polytex material with imprint.<br>- Zipper opening away from the body.<br>- Compartment for memory cards with zip under the lid.<br>- Additional front pocket with inside compartments for memory cards.<br>- Adjustable shoulder strap, can also be used as waist belt.<br>- Colour: Black/Blue.<br>- Line: Scroll.<br>- Material: Nylon (420 D).<br>- Model: Colt.<br>- Usage: Photo.<br>- Weight: 320 g.<br>- Inside Dimension Width: 17 cm.<br>- Inside Dimension Depth: 12 cm.<br>- Inside Dimension Height: 17 cm. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-010-3723, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
103723
NSN: 5315-00-010-3723
FSC: 5315
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
materialRUBBER CHLOROPRENE CLASS CR OVERALL
hole_diameter0.218 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
hardness_rating30.0 SHORE DUROMETER A NOMINAL OVERALL
outside_diameter2.500 INCHES NOMINAL IN
style_designatorCIRCULAR
aperture_diameter0.875 INCHES NOMINAL IN
bolt_hole_quantity4
bolt_circle_diameter2.000 INCHES NOMINAL IN
cross-sectional_thickness0.062 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5315-00-010-3723
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 103723 · Hama ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
FIRST END STYLE: CHAMFERED
•
PIN OVERALL LENGTH: 0.863 INCHES MINIMUM AND 0.887 INCHES MAXIMUM IN
•
PIN OVERALL DIAMETER: 0.1855 INCHES MINIMUM AND 0.1875 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633,FS1010 TO FS1030 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
FIRST END TAPER LENGTH: 0.016 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
FIRST END TAPER ANGLE: 25.0 DEGREES NOMINAL
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
FIRST END STYLECHAMFERED
PIN OVERALL LENGTH0.863 INCHES MINIMUM AND 0.887 INCHES MAXIMUM IN
PIN OVERALL DIAMETER0.1855 INCHES MINIMUM AND 0.1875 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-633,FS1010 TO FS1030 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
FIRST END TAPER LENGTH0.016 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
FIRST END TAPER ANGLE25.0 DEGREES NOMINAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
144EX29Interchangeable
interchangeable cross-reference
interchangeable
665Interchangeable
interchangeable cross-reference
interchangeable
2CR440Interchangeable
interchangeable cross-reference
interchangeable
103723Interchangeable
interchangeable cross-reference
interchangeable
224861-001Interchangeable
interchangeable cross-reference
interchangeable
HL12364SH2-251Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 103723?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 103723?
103723 is a CONE AND ROLLERS,TAPERED ROLLER manufactured by Hama.
What parts can replace 103723?
There are 9 known substitutes for 103723: 144EX29, 665, 2CR440 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 103723?
103723 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-010-3723. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 103723

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026