PartsTable
Technical Data Sheet
PartsTable / O-RING / 006-11306
006-11306 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, temp_rating: -85.0 FAHRENHEIT AND 401.0 FAHRENHEIT DEGF, hardness_rating: 50.0 SHORE DUROMETER A NOMINAL, outside_diameter: 0.254 INCHES NOMINAL IN, center_hole_diameter: 0.109 INCHES MINIMUM AND 0.119 INCHES MAXIMUM IN, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-184-7399, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
006-11306
NSN: 5331-00-184-7399
FSC: 5331 — O-RING
CAGE: 25184 — PARKER HANNIFIN CORPORATION DIV O-RING DIVISION (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC
temp_rating-85.0 FAHRENHEIT AND 401.0 FAHRENHEIT DEGF
hardness_rating50.0 SHORE DUROMETER A NOMINAL
outside_diameter0.254 INCHES NOMINAL IN
center_hole_diameter0.109 INCHES MINIMUM AND 0.119 INCHES MAXIMUM IN
cross-sectional_height0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
NSN5331-00-184-7399
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 006-11306 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 0.254 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.109 INCHES MINIMUM AND 0.119 INCHES MAXIMUM IN
•
HARDNESS RATING: 50.0 SHORE DUROMETER A NOMINAL
•
TEMP RATING: -85.0 FAHRENHEIT AND 401.0 FAHRENHEIT DEGF
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER0.254 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.109 INCHES MINIMUM AND 0.119 INCHES MAXIMUM IN
HARDNESS RATING50.0 SHORE DUROMETER A NOMINAL
TEMP RATING-85.0 FAHRENHEIT AND 401.0 FAHRENHEIT DEGF
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
2-006S383-7Interchangeable
interchangeable cross-reference
interchangeable
AS568B-006Interchangeable
interchangeable cross-reference
interchangeable
C10096-0060-0013Interchangeable
interchangeable cross-reference
interchangeable
AS568-013Interchangeable
interchangeable cross-reference
interchangeable
AMS3303-013ESInterchangeable
interchangeable cross-reference
interchangeable
AMS3303Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 006-11306?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 006-11306?
006-11306 is a O-RING.
What parts can replace 006-11306?
There are 18 known substitutes for 006-11306: 2-006S383-7, AS568B-006, C10096-0060-0013 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 006-11306?
006-11306 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-184-7399. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 006-11306

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026