PartsTable
Technical Data Sheet
PartsTable / O-RING / AS568B-006
AS568B-006 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, temp_rating: -30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, outside_diameter: 0.243 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN, center_hole_diameter: 0.109 INCHES MINIMUM AND 0.119 INCHES MAXIMUM IN, elongation_percentage: 331 MAXIMUM. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-004-5057, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AS568B-006
NSN: 5331-00-004-5057
FSC: 5331 — O-RING
CAGE: 81343 — SOCIETY OF AUTOMOTIVE ENGINEERS INC (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
temp_rating-30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
hardness_rating70.0 SHORE DUROMETER A NOMINAL
outside_diameter0.243 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
center_hole_diameter0.109 INCHES MINIMUM AND 0.119 INCHES MAXIMUM IN
elongation_percentage331 MAXIMUM
cross-sectional_height0.070 INCHES NOMINAL IN
NSN5331-00-004-5057
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AS568B-006 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER SYNTHETIC
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.108 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 0.254 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER SYNTHETIC
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.108 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
OUTSIDE DIAMETER0.254 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
PRP006-11306Interchangeable
interchangeable cross-reference
interchangeable
AS568B-006Interchangeable
interchangeable cross-reference
interchangeable
006-11306Interchangeable
interchangeable cross-reference
interchangeable
GV-22-525-1-70Interchangeable
interchangeable cross-reference
interchangeable
006-8307Interchangeable
interchangeable cross-reference
interchangeable
2-006S383-7Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy AS568B-006?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AS568B-006?
AS568B-006 is a O-RING.
What parts can replace AS568B-006?
There are 6 known substitutes for AS568B-006: PRP006-11306, AS568B-006, 006-11306 and 3 more. Substitute compatibility should be verified for your specific system.
Is AS568B-006 still available?
AS568B-006 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AS568B-006

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026