PartsTable
Technical Data Sheet

ZP20280-3 — Technical Data Sheet

✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The HANDLE,BOW is a the manufacturer industrial component. Key specifications include material: PLASTIC OVERALL, shaft_length: 0.220 INCHES NOMINAL IN, major_diameter: 0.370 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN, overall_length: 6.500 INCHES NOMINAL IN, handle_clearance: 1.600 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System under NSN 5340-01-325-2154, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ZP20280-3
NSN: 5340-01-325-2154
FSC: 5340
CAGE: 19178 — ZERO CORP DBA APW WRIGHTLINE (USA)
SPECIFICATIONS
materialPLASTIC OVERALL
shaft_length0.220 INCHES NOMINAL IN
major_diameter0.370 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
overall_length6.500 INCHES NOMINAL IN
handle_clearance1.600 INCHES NOMINAL IN
NSN5340-01-325-2154
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: ZP20280-3 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: PLASTIC OVERALL
•
COLOR: BLACK HANDLE
•
HANDLE CLEARANCE: 1.600 INCHES NOMINAL IN
•
SHAFT LENGTH: 0.220 INCHES NOMINAL IN
•
MAJOR DIAMETER: 0.370 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
MATERIALPLASTIC OVERALL
COLORBLACK HANDLE
OVERALL LENGTH6.500 INCHES NOMINAL IN
HANDLE CLEARANCE1.600 INCHES NOMINAL IN
SHAFT LENGTH0.220 INCHES NOMINAL IN
MAJOR DIAMETER0.370 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
202803InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
B-44NYInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
8P20280-3InterchangeableGOVERNMENT REGISTRY
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVEGOVERNMENT REGISTRY
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy ZP20280-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ZP20280-3?
ZP20280-3 is a HANDLE,BOW.
What parts can replace ZP20280-3?
There are 3 known substitutes for ZP20280-3: 202803, B-44NY, 8P20280-3. Substitute compatibility should be verified for your specific system.
What is the NSN for ZP20280-3?
ZP20280-3 is cataloged in the Federal Logistics Information System under NSN 5340-01-325-2154. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ZP20280-3