PartsTable
Technical Data Sheet
PartsTable / COMPONENT / B-44NY
B-44NY ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_diameter: 0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN, overall_width: 0.2400 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN, alignment_type: RIGID, surface_finish: GROUND, style_designator: NON-SEPARABLE, OPEN END, DRAWN SHELL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-185-0610, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
B-44NY
NSN: 3110-01-185-0610
FSC: 3110
CAGE: 60380 — TIMKEN AEROSPACE, INC DBA TORRINGTON PRODUCT (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_diameter0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
overall_width0.2400 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
alignment_typeRIGID
surface_finishGROUND
style_designatorNON-SEPARABLE, OPEN END, DRAWN SHELL
surface_treatmentNICKEL SHELL
overall_outside_diameter0.4370 INCHES MINIMUM AND 0.4380 INCHES MAXIMUM IN
specification/standard_data01359-202803 MANUFACTURERS SPECIFICATION CONTROL
standard_tolerance_designationAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
material_document_and_classificationHYNES ALLOY 25,FSCM 60380 MFR REF SINGLE MATERIAL RESPONSE ROLLER
NSN3110-01-185-0610
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: B-44NY · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL OUTSIDE DIAMETER: 0.4370 INCHES MINIMUM AND 0.4380 INCHES MAXIMUM IN
•
SURFACE FINISH: GROUND
•
MATERIAL: STEEL OVERALL
•
BORE DIAMETER: 0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
•
SPECIFICATION/STANDARD DATA: 01359-202803 MANUFACTURERS SPECIFICATION CONTROL
•
MATERIAL DOCUMENT AND CLASSIFICATION: HYNES ALLOY 25,FSCM 60380 MFR REF SINGLE MATERIAL RESPONSE ROLLER
•
STYLE DESIGNATOR: NON-SEPARABLE, OPEN END, DRAWN SHELL
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL OUTSIDE DIAMETER0.4370 INCHES MINIMUM AND 0.4380 INCHES MAXIMUM IN
SURFACE FINISHGROUND
MATERIALSTEEL OVERALL
BORE DIAMETER0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
OVERALL WIDTH0.2400 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
SPECIFICATION/STANDARD DATA01359-202803 MANUFACTURERS SPECIFICATION CONTROL
MATERIAL DOCUMENT AND CLASSIFICATIONHYNES ALLOY 25,FSCM 60380 MFR REF SINGLE MATERIAL RESPONSE ROLLER
STYLE DESIGNATORNON-SEPARABLE, OPEN END, DRAWN SHELL
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
SURFACE TREATMENTNICKEL SHELL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
B-44Interchangeable
interchangeable cross-reference
interchangeable
SB-44Interchangeable
interchangeable cross-reference
interchangeable
GC12A44Interchangeable
interchangeable cross-reference
interchangeable
00S811TYPE1CLASSAInterchangeable
interchangeable cross-reference
interchangeable
671-451-9004Interchangeable
interchangeable cross-reference
interchangeable
404-7277Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy B-44NY?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is B-44NY?
B-44NY is a BEARING,ROLLER,NEEDLE.
What parts can replace B-44NY?
There are 13 known substitutes for B-44NY: B-44, SB-44, GC12A44 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for B-44NY?
B-44NY is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-185-0610. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — B-44NY

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026