PartsTable
Technical Data Sheet
Download PDF

ZB0334373 — BUSHING,SLEEVE

✓ Government record, cited
— · BALL BEARING
PRODUCT OVERVIEW

ZB0334373: BUSHING,SLEEVE.

The BUSHING,SLEEVE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1008 OR STEEL COMP 1010, hole_diameter: 0.448 INCHES MINIMUM AND 0.463 INCHES MAXIMUM IN, overall_width: 6.660 INCHES NOMINAL IN, aperture_diameter: 5.000 INCHES NOMINAL IN, bolt_circle_diameter: 5.775 INCHES MINIMUM AND 5.785 INCHES MAXIMUM IN, outside_corner_radius: 0.440 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3120-01-425-0632, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ZB0334373
NSN: 3120-01-425-0632
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: Z5411 — ZODIAC MILPRO AUSTRALIA PTY LTD (AUS)
SPECIFICATIONS
materialSTEEL COMP 1008 OR STEEL COMP 1010
hole_diameter0.448 INCHES MINIMUM AND 0.463 INCHES MAXIMUM IN
overall_width6.660 INCHES NOMINAL IN
aperture_diameter5.000 INCHES NOMINAL IN
bolt_hole_quantity6
bolt_circle_diameter5.775 INCHES MINIMUM AND 5.785 INCHES MAXIMUM IN
outside_corner_radius0.440 INCHES NOMINAL IN
outside_corner_inverted_radius0.250 INCHES NOMINAL IN
side_radius_from_gasket_center2.940 INCHES NOMINAL IN
material_document_and_classificationSAE ASSN STD SINGLE MATERIAL RESPONSE
NSN3120-01-425-0632
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: ZB0334373 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
SUBSTITUTES & CROSS-REFERENCES 1
334373Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy ZB0334373?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ZB0334373?
ZB0334373 is a BUSHING,SLEEVE.
What parts can replace ZB0334373?
There is 1 known substitute for ZB0334373: 334373. Substitute compatibility should be verified for your specific system.
What is the NSN for ZB0334373?
ZB0334373 is cataloged in the U.S. Government catalog under NSN 3120-01-425-0632. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ZB0334373