PartsTable
Technical Data Sheet
Download PDF

334373 — BUSHING,SLEEVE

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

334373: BUSHING,SLEEVE.

The BUSHING,SLEEVE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1008 OR STEEL COMP 1010, hole_diameter: 0.448 INCHES MINIMUM AND 0.463 INCHES MAXIMUM IN, overall_width: 6.660 INCHES NOMINAL IN, aperture_diameter: 5.000 INCHES NOMINAL IN, bolt_circle_diameter: 5.775 INCHES MINIMUM AND 5.785 INCHES MAXIMUM IN, outside_corner_radius: 0.440 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5365-01-168-7294, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
334373
NSN: 5365-01-168-7294
NIINs: 011687294, 014250632
FSC: 5365 — Bushings, Rings, Shims, and Spacers
CAGE: 7X677 — GENERAL MOTORS LLC DBA GENERAL MOTORS LLC (USA)
SPECIFICATIONS
materialSTEEL COMP 1008 OR STEEL COMP 1010
hole_diameter0.448 INCHES MINIMUM AND 0.463 INCHES MAXIMUM IN
overall_width6.660 INCHES NOMINAL IN
aperture_diameter5.000 INCHES NOMINAL IN
bolt_hole_quantity6
bolt_circle_diameter5.775 INCHES MINIMUM AND 5.785 INCHES MAXIMUM IN
outside_corner_radius0.440 INCHES NOMINAL IN
outside_corner_inverted_radius0.250 INCHES NOMINAL IN
side_radius_from_gasket_center2.940 INCHES NOMINAL IN
material_document_and_classificationSAE ASSN STD SINGLE MATERIAL RESPONSE
NSN5365-01-168-7294
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available BUSHING,SLEEVE TITLE COMPONENT PN 334373 MFR BUSHING,SLEEVE
KEY FEATURES
•
SIDE RADIUS FROM GASKET CENTER: 2.940 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD SINGLE MATERIAL RESPONSE
•
OUTSIDE CORNER INVERTED RADIUS: 0.250 INCHES NOMINAL IN
•
APERTURE DIAMETER: 5.000 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 6
•
BOLT CIRCLE DIAMETER: 5.775 INCHES MINIMUM AND 5.785 INCHES MAXIMUM IN
•
OUTSIDE CORNER RADIUS: 0.440 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SIDE RADIUS FROM GASKET CENTER2.940 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD SINGLE MATERIAL RESPONSE
OVERALL WIDTH6.660 INCHES NOMINAL IN
OUTSIDE CORNER INVERTED RADIUS0.250 INCHES NOMINAL IN
APERTURE DIAMETER5.000 INCHES NOMINAL IN
BOLT HOLE QUANTITY6
BOLT CIRCLE DIAMETER5.775 INCHES MINIMUM AND 5.785 INCHES MAXIMUM IN
OUTSIDE CORNER RADIUS0.440 INCHES NOMINAL IN
MATERIALSTEEL COMP 1008 OR STEEL COMP 1010
HOLE DIAMETER0.448 INCHES MINIMUM AND 0.463 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 1
334361 ITEM 12Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 334373?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 334373?
334373 is a BUSHING,SLEEVE.
What parts can replace 334373?
There is 1 known substitute for 334373: 334361 ITEM 12. Substitute compatibility should be verified for your specific system.
What is the NSN for 334373?
334373 is cataloged in the U.S. Government catalog under NSN 5365-01-168-7294. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 334373

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.