PartsTable
Technical Data Sheet
PartsTable / COMPONENT / Y-1210-10-3
Y-1210-10-3 ✓ Verified by PartsTable
— · SFP TRANSCEIVER
WHAT YOU NEED TO KNOW
SR = Short Range (multimode, 300m) | LR = Long Range (single-mode, 10km) DOM = Digital Optical Monitoring — most enterprise SFPs support it
MATCH ALL THREE: Speed + Wavelength + Brand compatibility
PRODUCT OVERVIEW

The SEMICONDUCTOR DEVICE,DIODE is a the manufacturer industrial component. Key specifications include material: SILICON SEMICONDUCTOR, overall_length: 0.405 INCHES MAXIMUM IN, mounting_method: THREADED STUD(S), overall_diameter: 0.424 INCHES MAXIMUM IN, features_provided: HERMETICALLY SEALED CASE, nominal_thread_size: 0.190 INCHES IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5961-00-471-2400, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
Y-1210-10-3
NSN: 5961-00-471-2400
FSC: 5961
CAGE: 08484 — BREEZE-EASTERN LLC (USA)
SPECIFICATIONS
materialSILICON SEMICONDUCTOR
overall_length0.405 INCHES MAXIMUM IN
mounting_methodTHREADED STUD(S)
overall_diameter0.424 INCHES MAXIMUM IN
features_providedHERMETICALLY SEALED CASE
nominal_thread_size0.190 INCHES IN
thread_series_designatorUNF
mounting_facility_quantity1
overall_width_across_flats0.424 INCHES MINIMUM AND 0.437 INCHES MAXIMUM IN
terminal_type_and_quantity1 THREADED STUD AND 1 TAB, SOLDER LUG
specification/standard_data81349-MIL-S-19500/304 PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION
current_rating_per_characteristic12.00 AMPERES MAXIMUM AVERAGE FORWARD CURRENT AVERAGED OVER A FULL 60-HZ CYCLE
NSN5961-00-471-2400
COMPONENT DIAGRAM
BAIL LATCH 10G SFP+ 850nm · SR (MMF, 300m) DOM: Digital Optical Monitoring TX RX LC DUPLEX 20-PIN EDGE CONNECTOR ~56.5 mm ~13.4mm SFP+ TRANSCEIVER | 10G | 850nm | SR (MMF, 300m) Hot-swappable | LC duplex fiber | DDM/DOM supported TITLE SFP+ XCVR PN Y-1210-10-3 MFR OEM SEMICONDUCTOR DEVICE,DIODE
KEY FEATURES
•
THREAD SERIES DESIGNATOR: UNF
•
TEST DATA DOCUMENT: 81349-MIL-S-19500 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
•
FEATURES PROVIDED: HERMETICALLY SEALED CASE
•
VOLTAGE RATING IN VOLTS PER CHARACTERISTIC: 200.0 MAXIMUM REVERSE VOLTAGE, PEAK
•
MATERIAL: SILICON SEMICONDUCTOR
•
MOUNTING METHOD: THREADED STUD(S)
•
OVERALL DIAMETER: 0.424 INCHES MAXIMUM IN
•
OVERALL WIDTH ACROSS FLATS: 0.424 INCHES MINIMUM AND 0.437 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
THREAD SERIES DESIGNATORUNF
TEST DATA DOCUMENT81349-MIL-S-19500 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
FEATURES PROVIDEDHERMETICALLY SEALED CASE
VOLTAGE RATING IN VOLTS PER CHARACTERISTIC200.0 MAXIMUM REVERSE VOLTAGE, PEAK
MATERIALSILICON SEMICONDUCTOR
MOUNTING METHODTHREADED STUD(S)
OVERALL DIAMETER0.424 INCHES MAXIMUM IN
OVERALL WIDTH ACROSS FLATS0.424 INCHES MINIMUM AND 0.437 INCHES MAXIMUM IN
CURRENT RATING PER CHARACTERISTIC12.00 AMPERES MAXIMUM AVERAGE FORWARD CURRENT AVERAGED OVER A FULL 60-HZ CYCLE
OVERALL LENGTH0.405 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 32
JAN1N3893RAInterchangeable
interchangeable cross-reference
interchangeable
MIL-PRF-19500/304Interchangeable
interchangeable cross-reference
interchangeable
1N3893RInterchangeable
interchangeable cross-reference
interchangeable
JANTX1N3891RInterchangeable
interchangeable cross-reference
interchangeable
MILS19500-304Interchangeable
interchangeable cross-reference
interchangeable
2501580-512Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99ESD SensitiveNot HAZMAT
Ready to buy Y-1210-10-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is Y-1210-10-3?
Y-1210-10-3 is a SEMICONDUCTOR DEVICE,DIODE.
What parts can replace Y-1210-10-3?
There are 32 known substitutes for Y-1210-10-3: JAN1N3893RA, MIL-PRF-19500/304, 1N3893R and 29 more. Substitute compatibility should be verified for your specific system.
What is the NSN for Y-1210-10-3?
Y-1210-10-3 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5961-00-471-2400. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — Y-1210-10-3

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026