PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1N3893R
1N3893R ✓ Verified by PartsTable
— · SFP TRANSCEIVER
WHAT YOU NEED TO KNOW
SR = Short Range (multimode, 300m) | LR = Long Range (single-mode, 10km) DOM = Digital Optical Monitoring — most enterprise SFPs support it
MATCH ALL THREE: Speed + Wavelength + Brand compatibility
PRODUCT OVERVIEW

The COIL,RADIO FREQUENCY is a the manufacturer industrial component. Key specifications include material: GLASS ENCLOSURE, rating_method: ELECTRICAL SINGLE COMPONENT SINGLE WINDING, coil_form_type: SOLID SINGLE COMPONENT, inclosure_type: FULLY INCLOSED, overall_height: 0.405 INCHES MAXIMUM IN, overall_length: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5961-00-172-1733, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1N3893R
NSN: 5961-00-172-1733
FSC: 5961
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialGLASS ENCLOSURE
rating_methodELECTRICAL SINGLE COMPONENT SINGLE WINDING
coil_form_typeSOLID SINGLE COMPONENT
inclosure_typeFULLY INCLOSED
overall_height0.405 INCHES MAXIMUM IN
overall_length0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
quality_factor60 MINIMUM SINGLE COMPONENT SINGLE WINDING
mounting_methodTERMINAL SINGLE GROUP
overall_diameter0.090 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
special_featuresINDUCTANCE TOLERANCE,5 PCT
core_constructionPOWDERED SINGLE COMPONENT
features_providedHERMETICALLY SEALED CASE
NSN5961-00-172-1733
COMPONENT DIAGRAM
BAIL LATCH 10G SFP+ 850nm · SR (MMF, 300m) DOM: Digital Optical Monitoring TX RX LC DUPLEX 20-PIN EDGE CONNECTOR ~56.5 mm ~13.4mm SFP+ TRANSCEIVER | 10G | 850nm | SR (MMF, 300m) Hot-swappable | LC duplex fiber | DDM/DOM supported TITLE SFP+ XCVR PN 1N3893R MFR OEM COIL,RADIO FREQUENCY
KEY FEATURES
•
MAXIMUM OPERATING TEMP PER MEASUREMENT POINT: 150.0 CELSIUS CASE DEGC
•
TEST DATA DOCUMENT: 81349-MIL-S-19500 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
•
TERMINAL TYPE AND QUANTITY: 1 THREADED STUD AND 1 TAB, SOLDER LUG
•
VOLTAGE RATING IN VOLTS PER CHARACTERISTIC: 400.0 NOMINAL WORKING PEAK REVERSE VOLTAGE
•
MOUNTING FACILITY QUANTITY: 1
•
NOMINAL THREAD SIZE: 0.190 INCHES IN
TECHNICAL CHARACTERISTICS (FLIS)
MAXIMUM OPERATING TEMP PER MEASUREMENT POINT150.0 CELSIUS CASE DEGC
TEST DATA DOCUMENT81349-MIL-S-19500 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
TERMINAL TYPE AND QUANTITY1 THREADED STUD AND 1 TAB, SOLDER LUG
VOLTAGE RATING IN VOLTS PER CHARACTERISTIC400.0 NOMINAL WORKING PEAK REVERSE VOLTAGE
MOUNTING FACILITY QUANTITY1
NOMINAL THREAD SIZE0.190 INCHES IN
OVERALL HEIGHT0.405 INCHES MAXIMUM IN
OVERALL LENGTH0.405 INCHES MAXIMUM IN
CURRENT RATING PER CHARACTERISTIC15.00 MICROAMPERES MAXIMUM REVERSE CURRENT, DC
FEATURES PROVIDEDHERMETICALLY SEALED CASE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 28
JANTX1N3891RInterchangeable
interchangeable cross-reference
interchangeable
MILS19500-304Interchangeable
interchangeable cross-reference
interchangeable
2501580-512Interchangeable
interchangeable cross-reference
interchangeable
1N3893RInterchangeable
interchangeable cross-reference
interchangeable
1N3890Interchangeable
interchangeable cross-reference
interchangeable
JANTX1N3890AInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99ESD SensitiveNot HAZMAT
Ready to buy 1N3893R?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1N3893R?
1N3893R is a COIL,RADIO FREQUENCY.
What parts can replace 1N3893R?
There are 28 known substitutes for 1N3893R: JANTX1N3891R, MILS19500-304, 2501580-512 and 25 more. Substitute compatibility should be verified for your specific system.
Is 1N3893R still available?
1N3893R is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1N3893R

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026