PartsTable
Technical Data Sheet
PartsTable / COMPONENT / XLS2 3-4
XLS2 3-4 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 2.2500 INCHES NOMINAL IN, overall_width: 0.6875 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-109-1812, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
XLS2 3-4
NSN: 3110-00-109-1812
FSC: 3110
CAGE: 38443 — SKF USA INC. (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter2.2500 INCHES NOMINAL IN
overall_width0.6875 INCHES NOMINAL IN
load_directionRADIAL
surface_finishGROUND
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
features_providedALIGNING RING
overall_outside_diameter3.5625 INCHES NOMINAL IN
internal_fit-up_designationSTANDARD
retainer_fabrication_methodPRESSED
standard_tolerance_designationABEC NO.1
NSN3110-00-109-1812
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: XLS2 3-4 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 2.7500 INCHES NOMINAL IN
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
MATERIAL: STEEL INNER RING
•
STYLE DESIGNATOR: COUNTERBORED OUTER RING, NON-SEPARABLE
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER2.7500 INCHES NOMINAL IN
INTERNAL FIT-UP DESIGNATIONSTANDARD
OVERALL WIDTH0.6875 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONABEC NO.1
MATERIALSTEEL INNER RING
MATERIALSTEEL OUTER RING
STYLE DESIGNATORCOUNTERBORED OUTER RING, NON-SEPARABLE
MATERIALSTEEL BALL
LOAD DIRECTIONRADIAL
SURFACE FINISHGROUND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
50572Interchangeable
interchangeable cross-reference
interchangeable
GGG-D-751Interchangeable
interchangeable cross-reference
interchangeable
59632Interchangeable
interchangeable cross-reference
interchangeable
SC-B-70005Interchangeable
interchangeable cross-reference
interchangeable
8914-60Interchangeable
interchangeable cross-reference
interchangeable
177039-12Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy XLS2 3-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is XLS2 3-4?
XLS2 3-4 is a BEARING,BALL,ANNULAR.
What parts can replace XLS2 3-4?
There are 9 known substitutes for XLS2 3-4: 50572, GGG-D-751, 59632 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for XLS2 3-4?
XLS2 3-4 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-109-1812. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — XLS2 3-4

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026