PartsTable
Technical Data Sheet
50572 ✓ Verified by PartsTable
Sandberg · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

Many people often forget about cables when investing in a new professional hi-fi system. Even if your VCR produces a good picture, it is of little use if the cable transmitting the sound is not of professional quality. This high-quality S-video cable is double-shielded and has gold-plated connectors to ensure that the picture is always razor sharp.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-109-1812, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
MRO MRO_GENERAL 50572
NSN: 3110-00-109-1812
FSC: 3110
CAGE: 33844 — KLAUER MANUFACTURING COMPANY (USA)
SPECIFICATIONS
fsc_application_dataTELETYPE AND FACSIMILE EQUIPMENT
general_characteristics_item_descriptionMATERIAL,LOW CARBON STEEL WIRE; FINISH,E211 PER SPEC MIL-F-14072 PHOSPHATED PER SPEC K-F-14072; O/A DIA 0.154 IN. MIN AND 0.156 IN. MAX. IN
NSN3110-00-109-1812
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 50572 · Sandberg ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
BORE DIAMETER: 2.7500 INCHES NOMINAL IN
INTERNAL FIT-UP DESIGNATION: STANDARD
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
MATERIAL: STEEL INNER RING
STYLE DESIGNATOR: COUNTERBORED OUTER RING, NON-SEPARABLE
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER2.7500 INCHES NOMINAL IN
INTERNAL FIT-UP DESIGNATIONSTANDARD
OVERALL WIDTH0.6875 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONABEC NO.1
MATERIALSTEEL INNER RING
MATERIALSTEEL OUTER RING
STYLE DESIGNATORCOUNTERBORED OUTER RING, NON-SEPARABLE
MATERIALSTEEL BALL
LOAD DIRECTIONRADIAL
SURFACE FINISHGROUND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
50572Interchangeable
interchangeable cross-reference
interchangeable
GGG-D-751Interchangeable
interchangeable cross-reference
interchangeable
59632Interchangeable
interchangeable cross-reference
interchangeable
SC-B-70005Interchangeable
interchangeable cross-reference
interchangeable
8914-60Interchangeable
interchangeable cross-reference
interchangeable
177039-12Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 50572?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 50572?
50572 is a INSERT,PUNCH HAMMER,TELETYPEWRIT manufactured by Sandberg. It is classified as a MRO (MRO_GENERAL).
What parts can replace 50572?
There are 10 known substitutes for 50572: 50572, GGG-D-751, 59632 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 50572?
50572 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-109-1812. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 50572