PartsTable / COMPONENT / XF1
XF1
✓ Verified by PartsTable
LG · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
<b>See what the XF1 can do!</b><br><br><b>Attractive Mirror Finish</b><br>A sleek mirror finish makes for an eye-catching design.<br><br><b>USB 2.0 Connection</b><br>An advanced USB interface transfers raw data at rapid speeds. Compatible with USB version 2.0 and 1.1. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-218-4194, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
XF1
NSN: 5340-00-218-4194 FSC: 5340 CAGE: 63857 — CIRCOR NAVAL SOLUTIONS LLC DBA WARREN PUMPS (USA)
SPECIFICATIONS
thread_class 3B ROD CONNECTION tongue_width 1.500 INCHES NOMINAL IN style_designator CONNECTOR thread_direction RIGHT-HAND ROD CONNECTION nominal_thread_size 0.500 INCHES ROD CONNECTION IN shank_outside_diameter 1.000 INCHES NOMINAL IN thread_series_designator UNIFIED NATIONAL COARSE (UNC) ROD CONNECTION rod_connection_end_length 0.995 INCHES NOMINAL IN distance_from_end_to_hole_center 1.438 INCHES NOMINAL IN NSN 5340-00-218-4194
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: XF1
MFR: LG
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• ROD CONNECTION END LENGTH: 0.995 INCHES NOMINAL IN
• TONGUE WIDTH: 1.500 INCHES NOMINAL IN
• THREAD DIRECTION: RIGHT-HAND ROD CONNECTION
• DISTANCE FROM END TO HOLE CENTER: 1.438 INCHES NOMINAL IN
• NOMINAL THREAD SIZE: 0.500 INCHES ROD CONNECTION IN
• THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC) ROD CONNECTION
• SHANK OUTSIDE DIAMETER: 1.000 INCHES NOMINAL IN
• STYLE DESIGNATOR: CONNECTOR
TECHNICAL CHARACTERISTICS (FLIS)
ROD CONNECTION END LENGTH 0.995 INCHES NOMINAL IN TONGUE WIDTH 1.500 INCHES NOMINAL IN THREAD DIRECTION RIGHT-HAND ROD CONNECTION DISTANCE FROM END TO HOLE CENTER 1.438 INCHES NOMINAL IN NOMINAL THREAD SIZE 0.500 INCHES ROD CONNECTION IN THREAD SERIES DESIGNATOR UNIFIED NATIONAL COARSE (UNC) ROD CONNECTION SHANK OUTSIDE DIAMETER 1.000 INCHES NOMINAL IN STYLE DESIGNATOR CONNECTOR THREAD CLASS 3B ROD CONNECTION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
D-141 Interchangeable interchangeable cross-reference
interchangeable
9D13FW Interchangeable interchangeable cross-reference
interchangeable
8-8-B-M Interchangeable interchangeable cross-reference
interchangeable
SD-5 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy XF1?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is XF1?
XF1 is a CONNECTOR,ROD END manufactured by LG.
What parts can replace XF1?
There are 4 known substitutes for XF1: D-141, 9D13FW, 8-8-B-M and 1 more. Substitute compatibility should be verified for your specific system.
Is XF1 still available?
XF1 is currently cancelled.