PartsTable / COMPONENT / SD-5
SD-5
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
STRAP,TIE DOWN,ELECTRICAL COMPON. Key specifications include material: STEEL, mounting_shank: INCLUDED, overall_diameter: 0.500 INCHES NOMINAL IN, style_designator: BALL SHAPE, cutter_tooth_cut_style: MEDIUM, cutting_surface_length: 0.500 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-218-4194, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
SD-5
NSN: 5340-00-218-4194 FSC: 5340 CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
material STEEL mounting_shank INCLUDED overall_diameter 0.500 INCHES NOMINAL IN style_designator BALL SHAPE cutter_tooth_cut_style MEDIUM cutting_surface_length 0.500 INCHES NOMINAL IN cutter_tooth_shaping_method GROUND FROM SOLID cutter_tooth_style_designator C13 NSN 5340-00-218-4194
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: SD-5
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• ROD CONNECTION END LENGTH: 0.995 INCHES NOMINAL IN
• TONGUE WIDTH: 1.500 INCHES NOMINAL IN
• THREAD DIRECTION: RIGHT-HAND ROD CONNECTION
• DISTANCE FROM END TO HOLE CENTER: 1.438 INCHES NOMINAL IN
• NOMINAL THREAD SIZE: 0.500 INCHES ROD CONNECTION IN
• THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC) ROD CONNECTION
• SHANK OUTSIDE DIAMETER: 1.000 INCHES NOMINAL IN
• STYLE DESIGNATOR: CONNECTOR
TECHNICAL CHARACTERISTICS (FLIS)
ROD CONNECTION END LENGTH 0.995 INCHES NOMINAL IN TONGUE WIDTH 1.500 INCHES NOMINAL IN THREAD DIRECTION RIGHT-HAND ROD CONNECTION DISTANCE FROM END TO HOLE CENTER 1.438 INCHES NOMINAL IN NOMINAL THREAD SIZE 0.500 INCHES ROD CONNECTION IN THREAD SERIES DESIGNATOR UNIFIED NATIONAL COARSE (UNC) ROD CONNECTION SHANK OUTSIDE DIAMETER 1.000 INCHES NOMINAL IN STYLE DESIGNATOR CONNECTOR THREAD CLASS 3B ROD CONNECTION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
D-141 Interchangeable interchangeable cross-reference
interchangeable
9D13FW Interchangeable interchangeable cross-reference
interchangeable
8-8-B-M Interchangeable interchangeable cross-reference
interchangeable
SD-5 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy SD-5?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SD-5?
SD-5 is a STRAP,TIE DOWN,ELECTRICAL COMPON.
What parts can replace SD-5?
There are 4 known substitutes for SD-5: D-141, 9D13FW, 8-8-B-M and 1 more. Substitute compatibility should be verified for your specific system.
Is SD-5 still available?
SD-5 is currently cancelled.