PartsTable
Technical Data Sheet
PartsTable / COMPONENT / X54-32
X54-32 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The COIL,RADIO FREQUENCY is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT, case_style: SQUARE, seal_width: 0.375 INCHES NOMINAL IN, body_length: 0.752 INCHES NOMINAL IN, rating_method: WINDING TURNS SINGLE COMPONENT SINGLE WINDING, turn_quantity: 65 SINGLE COMPONENT SINGLE WINDING. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-179-0881, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
X54-32
NSN: 5330-00-179-0881
FSC: 5330
CAGE: 0E9N0 — DAVID BROWN HYDRAULICS INC DBA HYDRECO (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT
case_styleSQUARE
seal_width0.375 INCHES NOMINAL IN
body_length0.752 INCHES NOMINAL IN
rating_methodWINDING TURNS SINGLE COMPONENT SINGLE WINDING
turn_quantity65 SINGLE COMPONENT SINGLE WINDING
coil_form_typeSOLID SINGLE COMPONENT
inductance_rating6.50 MICROHENRIES NOMINAL SINGLE COMPONENT SINGLE WINDING
body_outside_diameter0.200 INCHES NOMINAL IN
housing_bore_diameter1.250 INCHES NOMINAL IN
reliability_indicatorNOT ESTABLISHED
sealing_element_styleANGULAR
NSN5330-00-179-0881
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: X54-32 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEALING ELEMENT STYLE: ANGULAR
•
SEAL WIDTH: 0.375 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 3000 FEET PER MINUTE FT
•
HOUSING BORE DIAMETER: 1.250 INCHES NOMINAL IN
•
CASE STYLE: SQUARE
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
•
ACCOMMODATED SHAFT DIAMETER: 0.750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SEALING ELEMENT STYLEANGULAR
SEAL WIDTH0.375 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED3000 FEET PER MINUTE FT
HOUSING BORE DIAMETER1.250 INCHES NOMINAL IN
CASE STYLESQUARE
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
MATERIALSTEEL CASE
ACCOMMODATED SHAFT DIAMETER0.750 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
7347Interchangeable
interchangeable cross-reference
interchangeable
51070Interchangeable
interchangeable cross-reference
interchangeable
5-131-04-024-00Interchangeable
interchangeable cross-reference
interchangeable
AMS-P-5510Interchangeable
interchangeable cross-reference
interchangeable
0921206-9Interchangeable
interchangeable cross-reference
interchangeable
A362X18Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy X54-32?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is X54-32?
X54-32 is a COIL,RADIO FREQUENCY.
What parts can replace X54-32?
There are 22 known substitutes for X54-32: 7347, 51070, 5-131-04-024-00 and 19 more. Substitute compatibility should be verified for your specific system.
Is X54-32 still available?
X54-32 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — X54-32

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026