PartsTable
Technical Data Sheet
PartsTable / MRO / 7347
7347 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The TRANSFORMER ASSEMBLY is a the manufacturer industrial component. Key specifications include phase: THREE INPUT, material: STEEL OVERALL, case_style: SQUARE, duty_cycle: CONTINUOUS, hole_depth: 0.5620 INCHES NOMINAL SINGLE END IN, seal_width: 0.375 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-015-2870, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 7347
NSN: 5330-00-015-2870
FSC: 5330
CAGE: 70210 — HONEYWELL INTERNATIONAL INC. DIV AEROSPACE - TORRANCE (USA)
SPECIFICATIONS
phaseTHREE INPUT
materialSTEEL OVERALL
case_styleSQUARE
duty_cycleCONTINUOUS
hole_depth0.5620 INCHES NOMINAL SINGLE END IN
seal_width0.375 INCHES NOMINAL IN
seat_angle37.0 DEGREES SECOND END
body_length1.870 INCHES NOMINAL IN
design_typeSTRAIGHT SINGLE ANTENNA ELEMENT
temp_rating40.0 OPERATING CELSIUS AND 55.0 AMBIENT CELSIUS
bearing_typeANNULAR BALL
reducer_typeCONCENTRIC
NSN5330-00-015-2870
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7347 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
51X140Interchangeable
interchangeable cross-reference
interchangeable
X54-32Interchangeable
interchangeable cross-reference
interchangeable
585S42Interchangeable
interchangeable cross-reference
interchangeable
7347Interchangeable
interchangeable cross-reference
interchangeable
WE2345Interchangeable
interchangeable cross-reference
interchangeable
17M10SERVICEACLASSAInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7347?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7347?
7347 is a TRANSFORMER ASSEMBLY. It is classified as a MRO (MRO_GENERAL).
What parts can replace 7347?
There are 13 known substitutes for 7347: 51X140, X54-32, 585S42 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 7347?
7347 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-015-2870. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7347

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026