PartsTable
Technical Data Sheet
PartsTable / COMPONENT / A-A-1192A
A-A-1192A ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The HANGER,PIPE is a the manufacturer industrial component. Key specifications include material: STEEL, style_designator: CLEVIS, nondefinitive_spec/std_data: 1 TYPE, pipe_accommodation_diameter: 2.000 INCHES NOMINAL IN, supported_item_and_quantity: 1 PIPE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-725-6363, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A-A-1192A
NSN: 5340-00-725-6363
FSC: 5340
CAGE: 80244 — GENERAL SERVICES ADMINISTRATION FEDERAL SUPPLY SERVICE (USA)
SPECIFICATIONS
materialSTEEL
style_designatorCLEVIS
nondefinitive_spec/std_data1 TYPE
pipe_accommodation_diameter2.000 INCHES NOMINAL IN
supported_item_and_quantity1 PIPE
NSN5340-00-725-6363
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: A-A-1192A MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: CLEVIS
•
MATERIAL: STEEL
•
NONDEFINITIVE SPEC/STD DATA: 1 TYPE
•
PIPE ACCOMMODATION DIAMETER: 2.000 INCHES NOMINAL IN
•
SUPPORTED ITEM AND QUANTITY: 1 PIPE
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORCLEVIS
MATERIALSTEEL
NONDEFINITIVE SPEC/STD DATA1 TYPE
PIPE ACCOMMODATION DIAMETER2.000 INCHES NOMINAL IN
SUPPORTED ITEM AND QUANTITY1 PIPE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
260-6Upgraded Successor
successor cross-reference
successor
WWH171TYPE1Upgraded Successor
successor cross-reference
successor
260-3-4PDUpgraded Successor
successor cross-reference
successor
FF-S-760 TY1STAUpgraded Successor
successor cross-reference
successor
MSS SP-58Upgraded Successor
successor cross-reference
successor
FF-S-760Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy A-A-1192A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A-A-1192A?
A-A-1192A is a HANGER,PIPE.
What parts can replace A-A-1192A?
There are 13 known substitutes for A-A-1192A: 260-6, WWH171TYPE1, 260-3-4PD and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for A-A-1192A?
A-A-1192A is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-725-6363. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A-A-1192A

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026